Examples of using Scale factor in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
MEP Scale Factor Optimizer.
And we also need to know the scale factor for image assets.
Image scale factor- A number between 0.2 and 1.
So, now you know your DP dimensions and scale factor for assets.
Thus the scale factor for area is s2.
Run the clock back far enough and the scale factor should go to zero.
Scale factor"" repeatability" less(better) than 1250 ppm; and.
I believe the transformation rule is(x, y-7),but I don't know what the scale factor is.
The time and scale factors were irrelevant when dealing with human rights.
Each magnetometer x value is then divided by this scale factor to produce the desired circle.
Scale factor" is defined as the ratio of change in output to a change in the input.
To minimize the effect of this, COMSOL applies a scale factor to the equations before they are solved.
The diameter of the coin is 2.5 cm,and the side view's scale factor was calculated with Equation 1.
Apos; Scale factor'' repeatability' less(better) than 1250 ppm; and.
For example, for reflectance data scaled into the range of 0 to 10,000,set the scale factor to 10,000.
Theoretically, the scale factor of the universe becomes infinite at a finite time in the future.
The relationship between the determined scale andthe actual scale value is called the Scale Factor(SF).
One monitor can have a scale factor of 175% and another a scale factor of 400%.
Using the width of 1024 DP and the device's 320 DPI, if we run through this equation,we would get a scale factor of 2.
Applications that use the HRPWM feature should use MEP Scale Factor Optimizer(SFO) estimation software functions.
The scale factor is a constant and known property of the currency; i. e applications can determine the scale factor from the currency.
If you are using MongoDB version 3.4 or higher, using the decimal type formodeling monetary data is preferable to the Scale Factor method.
It includes also the case that one or more scale factors are equal to zero(projection), and the case of one or more negative scale factors. .
Consider the following collection which used the Scale Factor approach and saved the monetary value as a 64-bit integer representing the number of cents:.
For example, as volume scales, with the scaling factor S, the tank diameter scales with S to the 1/3.
The most important sources of error are electrical noise,mechanical misalignments, and scaling factors.
The number of itemsis still increasing by a factor of 10, but the scaling factor of O(1) is always 1.
M is the scaling factor.
UWP has set scale-200 as the default image scaling factor.