Examples of using Surface should in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
The surface should be consistent.
When you touch it, the surface should be soft.
The surface should be slightly rough.
When you touch it, the surface should be soft.
The surface should be slightly darker.
The strip surface should be smooth, clean and should not affect the use of defects.
For long-term parked cars, the metal surface should be kept clean.
The printing surface should be flat and continuous;
Battery case should be complete, no tilt, and the surface should be clean.
The contact surface should not be too small.
After welding, in order to prevent local corrosion or strength drop, the surface should be grinded or cleaned.
The pasted over surface should not have significant irregularities.
To ensure the quality of the wire rope,the galvanized steel wire surface should be smooth, complete, uniform and strong.
Its surface should be chemically unreactive so that it won't change the taste or edibility of food.
Therefore, the mechanical cleaning surface should preferably be cleaned in a dry condition.
If anyone questioned whether Microsoft couldget back in the fight once the cuffs finally came off, Surface should put those doubts to rest.
The thoroughly cleaned surface should be checked by iron test and/ or water test.
A good table surface should have several layers of cleaning wipes, and several piece of lens cleaning paper.
Therefore, the mechanical cleaning surface should preferably be cleaned under dry conditions.
Reducing the attack surface should be a primary requirement for all modern network security technologies.
(4) The assembly friction surface should be kept dry,should not work in the rain.
(1) bearing ring circumferential surface should be well supported and uniform force to reduce the deformation, and can give full play to the bearing capacity.
Therefore, the mechanical cleaning surface should be carried out under dry conditions in the regular clean-up.
The thoroughly cleaned surface should be checked by iron test and/ or water test.
Note that the construction surface should be uniform, as long as it is coated with a thin layer.
The surfaces should be broad and simple, defined by a bold and clear design, accentuated in the important places.
Bartholdi wrote of his technique: The surfaces should be broad and simple, defined by a bold and clear design, accentuated in the important places.