Examples of using Current source in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Current source and function.
Stand-alone operation- no fixed current source, no cable length, etc.
Current source/transformer with primary current up to Irms= 6000 A.
Connect the welding cable that connects the current source and the contact block.
High voltage constant current sources and bridges are integrated in a portable industrial chassis.
Graph 7 it is active antenna,the join of box of direct current source and receiver pursues.
High voltage constant current sources and bridges are integrated in a portable industrial chassis.
The making cent of this project is aerial amplifier andbox of direct current source two parts.
C7 of voltage of 13V direct current source has bypass effect after C6 filter wave.
If the lamps are designed for voltage of 12-24 V, the electronic transformer is needed,providing soft handling current source.
High voltage constant current sources and bridges are integrated in a portable industrial chassis.
Basic principle of the anodic oxidation, in which,by applying a voltage with a current source, an oxide layer is formed on a metallic anode.
New chemical current sources, mounted on a rocket, batteries are of constant readiness and require no battery-charging station.
So, for example, for a power supply designed for a current source of 250 A, a scheme will be applied in which.
Current sources use"Chiari malformation" to describe four specific types of the condition, reserving the term"Arnold-Chiari" for type II only.
To do this,you hold the instrument on a current source that is already known and check whether the display is correct.
The wheel jet 18 is driven by a fuel engine andis hence the adeqate solution for the often expressed request of our customers for being independent from external current sources.
The device using SMPS to form high-voltage constant current source, no-load voltage is -15000V, short-circuit current is 30mA.
Homemade pulse current source provides short current pulses through the sample up to 320A. This current flows through thick blue wires right.
The device using SMPS to form high-voltage constant current source, no-load voltage is -15000V, short-circuit current is 30mA.
You will see that the current(Id) in the voltage range(Vds) from 5 to 15V increases by about 0.5 mA,allowing us to estimate that the dynamic resistance of the current source would be approximately 20kΩ.
And the output of LED drive power is mostly the constant current source which can change the voltage with the positive pressure drop value of the LED.
You will see that the current(Id) in the voltage range(Vds) from 5 to 15V increases by about 0.5 mA,allowing us to estimate that the dynamic resistance of the current source would be approximately 20kΩ.
Flashover breakdown point,after breakdown the constant current source can maintain the arc, a stable current through the bridge, the bridge has enough sensitivity.
On the rack are placed the following instrument( from top to bottom): nanovoltmeter for the determination of temperature at the sample place, transformers for voltage amplification, phase sensitive lock-in amplifier for the measurement of voltage at the sample, voltage amplifier, analog to digital converter that converts the measured current and voltage in digital form, source of ac voltage and arbitrary pulse form,pulse current source.
One is a constant voltage source for multiple constant current sources, and each constant current source supplies power to each LED individually.
The tension of 13V direct current source that is increased in J2 is passed same paragraph of coaxial cable and J1 are aerial amplifier power supply, c4 cuts off this volts d.c.
The DC source voltage zero, the current transferred to the maximum, then the lamp beads positive and negative,adjust the current source voltage From zero to become larger, to the lamp beads light, when the voltage on the LED lamp beads about the voltage.
Thanks to chemical current sources, sunlight is converted into energy throughout the day, and as soon as the sun goes beyond the horizon, the light-emitting diodes, which have heated up during a hot day, begin to glow.
HZ-3220E transformer dc winding resistance tester with temperature rise software I. General The traditional high andlow voltage series connection test of the constant current source can't be applied during temperature rise test of the power transmission transformer because….