Examples of using Current source in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Current source.
Resume playing the current source.
Current sources of error.
Adjustable current source up to 4 kA.
Constant voltage source or constant current source.
This is due to the current sources used(accumulator, batteries).
INKAR ZP 1000 DUO belongs to the range of portable current sources.
Instead, we use active loads and current sources comprised of MOS transistors.
The oscillations transformed in current(rectified)goes into the circuit as a current source.
ZP 2000 DUO is current source from the range of portable current sources.
Most often, such a need arises when repairing a car,where the current source is the battery.
These current sources are used in much the same way that we used them for BJT amplifier biasing.
So the equivalent circuit is a 3.75 mA current source in parallel with a 2 kΩ resistor.
As we will see next,the input bias voltage is often replaced by an active current source.
Multiple current sources allow for simultaneous stimulation of multiple channels with full power and precision.
If you know a product code Meanwell, for example a LED power supply, current source, model 35watt at 350mA is seeking direct popular APC-35.
If the lamps are designed for voltage of 12-24 V, the electronic transformer is needed,providing soft handling current source.
Finally, we combine resistances and change both current sources back to voltage sources to obtain the simplified equivalent of Figure 21(e).
The current implementation of the backup functionality only supports local files as source files! Your current source file is'%1'.
More complex, current source circuits are required when driving high-power LEDs for illumination to achieve correct current regulation.
The device using SMPS to form high-voltage constant current source, no-load voltage is -15000V, short-circuit current is 30mA.
Current source- model Keithley 6220/ 6221, for test currents of maximum 100mA or AMETEK/Sorensen, for test currents larger than 100mA, up to 3000A.
Flashover breakdown point,after breakdown the constant current source can maintain the arc, a stable current through the bridge, the bridge has enough sensitivity.
The circuit is further simplified in Figure 21(d) where the series combination of the dependent voltage source andresistor is replaced by a parallel combination of a dependent current source and resistor.
General The traditional high andlow voltage series connection test of the constant current source can't be applied during temperature rise test of the power transmission transformer because….
In the example, the total current Itotal is given by:: the current through the load is then, using the current divider rule::: andthe equivalent resistance looking back into the circuit is:: so the equivalent circuit is a 3.75 mA current source in parallel with a 2 kΩ resistor.
General The traditional high andlow voltage series connection test of the constant current source can't be applied during temperature rise test of the power transmission transformer because difference between….
AC6800 power supply units work as a reliable andstable source of power that can be used in applications that require manual adjustment of alternate/direct current source, or where entirely automatic tests are needed.
The traditional high and low voltage series connection test of the constant current source can't be applied during temperature rise test of the power transmission transformer because difference between high and low voltage windings of the transformer is great.
Example of a Norton equivalent circuit==In the example, the total current"I"total is given by: :formula_1The current through the load is then, using the current divider rule: :formula_2:formula_3And the equivalent resistance looking back into the circuit is::formula_4So the equivalent circuit is a 3.75 mA current source in parallel with a 2 kΩ resistor.