Examples of using Flat and smooth in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Should be as flat and smooth.
To further gate to the frame snugly as closely as possible,the outer side of it must be perfectly flat and smooth.
The cut should be flat and smooth.
Put the tiles on a flat and smooth surface, and then make an incision along the pre-planned line.
The board should be flat and smooth.
The surface looks flat and smooth but up close it's actually anything but.
On the reverse side is flat and smooth.
Boards should be flat and smooth, so polished on all sides, including the ends, edges and corners.
Floor surface is perfectly flat and smooth;
Such an installation is made on a flat and smooth surface, eliminating distortionand possible deformation.
The main condition- that the walls are flat and smooth.
To quickly and reliably assemble the frame you want to use for the profile Prosekatel drywall, which leaves dents when the compound does not require marking holes,making edge products flat and smooth.
This option is suitable only for a flat and smooth surface.
Therefore, when planning the repair,should pay attention to the installation of beacons, as they will help to make the floor flat and smooth as possible.
Gap between the bathtub and the wall appears inevitable- no matter how flat and smooth surface were not in the bathroom.
Rather, NT2000 microphone is a multi- point mode transistor large diaphragm studio condenser microphone, in addition, it has 7dBA noise equivalent technical indicators and clear bright, flat and smooth tone.
It is attractive little island with weird shape and lot of large, flat and smooth rocks that are very comfortable to lay on.
Gapless suspended ceilings assembled from slats, which have a special wayattachment,allowing you to create a perfectly flat and smooth surface.
Carrying out the work yourself,it is important to know how to putty the walls to get a flat and smooth surface for painting or wallpapering.
Their main difference from the usual- a special manufacturing technology based on the use of dense two-layer paper, which perfectly conceals imperfections and creates the ceiling perfectly flat and smooth surface.
For rooms, decorated in contemporary styles and do not require perfectly flat and smooth surfaces, would be the best decorative plaster.
Epoch-making styles such as Baroque, Classicism, Rococo and Empire,require flat and smooth walls.
Makes the surface of the dermis perfectly flat and smooth.
Works manages to hold fast to arrive at a perfectly flat and smooth bend.
This work, despite its apparent simplicity, requires a special approach and special knowledge of the art,with which you can get a perfectly flat and smooth surface of the base.
Area of the decorative coating is smooth, flat and free of shackles.
How to install a smooth and flat ceiling?
This value is acceptable for a smooth and flat surface.
After the final drying grout makes for a perfectly smooth and flat surface.
I Stainless steel tube surface finish and smooth and flat inner wall.