Examples of using Surface may in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
The skin on their surface may wrinkle.
Your Surface may turn off when you unplug it.
As staining or discoloration of the surface may result.
Your Surface may restart automatically to install certain updates.
The complexity of the road surface may also be uneven.
Surface may require up to 10 minutes to restart and apply all updates.
Form transparent surface may be very different.
But before you put on top of a sheet of paper,otherwise the surface may blister.
During the operation on the surface may be formed scratch defects.
So recess surface may be smooth or embossed and color solution may be the same color or contrast solution wall with it.
Purple- rich, butsad at large surface may have a negative effect.
A glass surface may sound fragile, but the prototypes have been extensively tested and were found to be able to withstand even the heaviest trucks.
The bubbles of gas that burst from its surface may be 50 feet across.
The height of the deck surface may not be enlarged by using ladders, crates or other items of equipment.
Moreover, this diversity is achieved not only the color schemes,tile surface may be rough, untreated, glazed.
In this case,the treated surface may be masked with wax using alcohol markers.
Experts advise to buy products with a small margin, because in the course of work a few paintings can be ruined,and over time the surface may deteriorate and it will have to.
The adhesive bonding surface may be under the following mechanical stresses.
If the problem with your Surface is not covered by the warranty orif your warranty has expired, your Surface may be eligible for out-of-warranty service for a fee.
Depending on this, their surface may be coated with resins, wax or a mixture of both.
The above feature induces the CSB-EPB3 material is applicable for the high load and low speed operation while too smooth andtoo rough surface may result into the increasing of friction factor.
As a result, the quartz surface may shrink and there will be marks leaved on it.
Hydrofluoric acid on insulating materials, metal materials are very corrosive, on the porcelain, glass is also very corrosive, there are certain hazards to the human body at low ambient temperature may condense into dew attached to the surface of the parts,in the Insulation surface may occur along the surface discharge breakdown occurred, therefore, to strictly control the moisture content of SF6 gas.
As a result, the quartz surface may shrink and there will be marks leaved on it.
Therearethosewho believe what lies deep beneath the Oak Island surface may not just be one treasure, but several.
Rough surface may result into the increasing of friction factor of the CSB-EPB13 material but when the roughness of the surface is greater than Ra0.5, the friction factor will remain relatively stable again.
Accordingly, the use of screws for attaching the beacon to the surface may not be feasible because the sharp ends of the screws may break waterproofing.
Rough surface may result into the increasing of friction factor of the CSB-EPB13 material but when the roughness of the surface is greater than Ra0.5, the friction factor will remain relatively stable again.
Click on image to enlarge Image courtesy of Rasmus Benestad Changes in land surface may also play a role by changing the way the planet reflects light as well as the exchange of moisture and energy between the surface and the atmosphere.
In some places the soil surface may spread the excess discharge energy also by channels relatively independent of the resistance, random paths which temporarily creates by ionization of materials present on site or by processes that resemble dielectric breakdown.