Examples of using Bottom part in English and their translations into Czech
{-}
-
Colloquial
-
Official
Here is the bottom part.
Clean bottom part 12 with a damp cloth.
Now I will read the bottom part.
Not the bottom part, obviously.
Take collector 7 out of bottom part.
Press the bottom part down with force.
It's paper, so why doesn't the bottom part burn?
That bottom part needs to go in the car.
Separate the battery section from the bottom part.
So why doesn't the bottom part burn? It's paper?
Pour 0.25 l of clean drinking water into bottom part 12.
Never dip the bottom part, the wire and the plug in water.
Dad wraps his thumb and his forefinger round the bottom part.
Cleaning nozzle with changeable bottom part for wet/dry cleanig.
The lock will release andyou can open and remove the bottom part.
Years on the enamelled kettle(bottom part and lid) against corrosion perforation.
Its bottom part below the frame levitates slightly around the central support.
It is scraped virtually all to the bottom part of the whole.
Insert the noses on the bottom part into the hole located on the front of the wireless mouse.
Assemble the steam release lid(6),turning the bottom part to the position.
Wind the cable on the bottom part and then assemble the fryer again in the following order.
First put its top part in, andthen push its bottom part to the position.
Then close the bottom part on the wireless mouse until the unlock button(14) clicks into place.
Replace the back cover,first inserting the top and then the bottom part, Fig. 3 e.
Place steamer baskets 5 on bottom part 12:- ensure that the steamer baskets 5 are.
The bottom part of the tonfa's body is flat so that the tonfa fits perfectly in hand and does not slip out.
Remove the protection sleeve,lift the upper parts of the handle and assemble it with the bottom part.
Inside bottom part can keep a jewel without scar because red high-quality velvet has been spread.
Pull and hold top part of knob and depress bottom part of knob in a clockwise direction to release pusher. Fig 3.
In its bottom part, an aeration system is installed that blows oxygen to the activation tank and for cleaning the membranes.