Examples of using Communication unit in English and their translations into Czech
{-}
-
Colloquial
-
Official
From the communication unit.
Each station consists of a master,up to 14 slaves, and the SC-HG1-485 communication unit.
Connecting the FOD communication unit to the user network.
The downloading mentioned here allows for the transfer of firmware modules between Communication units(CU) in the MORSE network.
One communication unit can connect up to 16 fiber-optic, laser and pressure sensors.
It may be some kind of a communication unit.
The communication unit acts as an interface between a PC and a safety light curtain of the SF4D series.
It may be some kind of a communication unit.
This communication unit converts the output signal of a sensor amplifier into communication data for EtherCAT.
This is field ops communication unit.
The FOD communication unit is connected to the user network by an Ethernet cable via interfaces GpE, IEEE802.3ac 1000BASE-T.
It may be some kind of a communication unit.
The SC-GU1-485 communication unit greatly improves ease of operation by allowing you to start, monitor and manage equipment.
It may be some kind of a communication unit.
The new RS485 communication unit for the HG-S sensor series is used to transfer high-precision measurement values directly, making data traceability easier than before.
Fig. 5.27: Connecting the FOD communication unit.
One to five nodes are contained in the Communication unit(CU), which most frequently is an MR400 series modem or the older MR25 model.
The SolarSET contains an OilSET 1000 12VDC failure reporting sensor, a Labcom 12VDC communication unit, a battery, and a solar panel.
Before connecting the FOD communication unit to the supply(to the user network) the FOD unit must be grounded according to Section 5.4,“Grounding”.
Each shaft can have up to 6 communication units.
The communication unit connects to the PC with a USB cable(USB2.0, A: Mini-B, not included) and to the safety light curtains with the cable attached.
External dimensions of ODU communication unit: 245× 245× 150 mm weight 3.3 kg.
Support for dial-up on GSM or telephone modems The transfer is designated to occasional use,e.g. for the configuration changings in the distant communication unit CU.
Extremely easy installation andinvisible technology: the communication unit is slotted into the edge of the helmet and is completely hidden.
The communication unit then collects data from all TV sets at home, archives them and transmits them via GSM network to the data collection centre.
Both Addr andBCW fields are removed in the transmitting radio modem(Communication Unit- CU) or regenerated in the receiving CU.
The communication cassette system extends the serial communication functionality of the CPU without the need to buy orinstall a dedicated communication unit.
Before connecting the FOD communication unit to the supply(to the user network) the FOD unit must be grounded according to Section 2.4,“Lightening Protection System(LPS)”.
For example some Landis+Gyr electricity meters equipped with the Dialog CU-Bx communication unit can be configured in order to use the same speed for the whole communication- this way it is possible to communicate via modems and internet tunnels.
Connecting the FOD communication unit to the user network The FOD communication unit is connected to the user network by an Ethernet cable via interfaces GbE, IEEE802.3ac 1000BASE-T.