Examples of using Ethernet interface in English and their translations into Czech
{-}
-
Colloquial
-
Official
For built-in Ethernet interface e.g.
Ethernet interface physical layer parameters setup.
Networking is possible through an Ethernet Interface.
S7-1200 Ethernet interface is integrated.
HART IP andEtherNet/IP are transmitted via Ethernet interface.
Ethernet interface for integration into the machine controller.
Measurement data output via Ethernet interface in real time.
The Ethernet interface switches between 10 and 100 Mbit/s automatically.
Real-time output of measurement data via Ethernet interface.
Auto-negotiation at Ethernet interface fixed- 1000HD mode removed.
Ethernet interface with TCP/IP protocol directly in the sensor head.
The equipment is easy to use andcan be networked via an Ethernet interface.
Ethernet interface offers simple operation using a web browser.
All 300S CPU systems are equipped with Ethernet interface for PU/OP communication.
Standard Ethernet interface for integration into existing networks and internet connection.
The ACX52.22 add on card has the Ethernet interface with implemented OPC interface. .
It is possible to turn auto negotiation off and set a rate and duplex manually on the Ethernet interface of the router.
In addition, its Ethernet interface allows you to enjoy VoIP communication.
Status- Ethernet bridge Ethernet bridge section gives short overview of Ethernet interface settings and data flow.
The communication is over Ethernet interface, supported by commonly available fi eldbus systems.
GPRS/EDGE ER75i v2 router is used to wirelessly connect various equipments and devices via Ethernet interface 10/100 to the Internet or intranet.
An SD memory card slot, an Ethernet interface and a sound output function are also available for various models.
The menu is uploaded to the terminal Flash memory either through SoftPLC Touchscreen Editor, orover FTP protocol into the file system of the terminal over the Ethernet interface.
Accelerators will provide Ethernet interface with total throughput of 400 Gbps in both directions.
Sensor unit 2 Sampling probe 3 Signal cable 4 Evaluation electronics with touch screen display 5 Result shown on touch screen display 6 Average of last 10 measurements 7 Limit value 8 Ethernet interface.
Whichever unit is active(either“A or B”),RipEX Ethernet interface will use this MAC address.
Native gigabit Ethernet interface is able to cope with 170Mbps user data throughput at low latency.
All functions of the INSYS devices with Ethernet interface are configured via a comfortable web interface. .
The native gigabit Ethernet interface is able to cope with full speed user data throughput at low latency.
Embedded operating systems and the USB-/Ethernet interface provide an easy use as well as data update of the system.