Examples of using Led indicator in English and their translations into Czech
{-}
-
Colloquial
-
Official
LED indicator for core temperature.
The operation LED indicator stops flashing.
Overview of the speaker a LED indicator.
The LED indicator will flash in blue rapidly.
Visual installation aid/LED indicator yellow.
The LED indicator flashes white during charging.
While recording the red LED indicator flashes.
LED indicator for reader state indication.
One two-color LED indicator for system status.
LED Indicator Color Status Meaning- ON Power ON Power.
Waiting for Wi-Fi password:The red LED indicator.
The LED indicator flashes white during charging.
Press the SETUP key until the LED indicator is permanently lit.
LED indicator Flashes one time every 3 seconds.
In this mode, the red LED indicator will light on eternally.
LED indicator(green) to connect power and KNX.
While searching for the device, the radio LED indicator flashes.
LED indicator for remote control operation.
Wait until the green LED indicator on the device starts flashing.
LED indicators for door and controller status indication.
After completion of this process, the appropriate LeD indicator 3 lights up.
When LED indicators turn to blue, the pairing succeeds.
The device is faulty if the LED indicator does not illuminate or flash.
Led indicator color shows the status of power On/Off.
When successfully paired, the LED indicator will flash in blue once a second.
The LED indicator flashes once followed by permanent light.
When the tool temperature is high, the LED indicator may flicker or light up.
Green LED indicator or charger/power supply defective.
Press the menu button(Menu)repeatedly to select the desired function as shown by the LED indicator.
LED indicators keep blinking GREEN after 4 hours charging.