Examples of using Level indicator in English and their translations into Czech
{-}
-
Colloquial
-
Official
Level indicator.
Look at this water level indicator.
Fill level indicator tank water.
Dust collection system level indicator.
Fill level indicator tank water.
The symbol“” will appear on the power level indicator.
Oil level indicator(2) Linear guide.
Input voltage Load level indicator, flashing.
To be on the safe side, check the water level on water level indicator 13.
A water level indicator with MIN and MAX mark is to be.
Please note the level on the water level indicator.
To check, insert the oil level indicator and pull easily fixed.
Fill the water tank(3) with water up to the"max" level shown on the water level indicator 5.
Use the water level indicator(B) as reference for the required amount of fresh water.
Only operate with a completely full storage tank(Level indicator) and heating circuit.
The integrated fill level indicator displays how many litres of water you have added.
MAKE SURE not to fill water past the maximum marking on the inside of the pot or on the water level indicator.
Ideally check they have been filled-the water level indicator need not always be working properly.
Water level indicator A removable and washable filter On/off switch and light indicator Color.
You can read off the fi lling level on the water level indicator on both sides of the device.
Is too low, the water level indicator on the LCD display starts to blink, and the appliance produces a sound signal.
Fill the water tank with descaling solution up to the“max” level shown on the water level indicator 5.
A lighting dot at the power level indicator of the heating zone informs you that the TIMER is engaged for that zone.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below.
Cleaning the water level indicator Turn the water level indicator counter-clockwise(5) through approx. 30 and pull out of the inner cover.
Input voltage Output voltage AC mode indicator Battery mode indicator Load level indicator.
When the water tank is full the water level indicator shines with a red light and the unit switches off automatically.
Do not activate the kettle if the amount of water does not reach the„max” level on the water level indicator 3.
When the batteries are empty the last battery level indicator will flash for 20 seconds before the product switches off automatically.
Spout B Lid latch C Lid D On/off switch(I/O) with power-on light E Mains cord F Cord storage facility G Base H Water level indicator I Scale filter.