Examples of using Time format in English and their translations into Czech
{-}
-
Colloquial
-
Official
Hours Minutes Year Month Day Daylight savings time Format.
Select the time format as"24 HOUR" or"12 HOUR.
Press the buttons MODE 3 or CLEAR 5 to set the desired time format.
If needed, modify the time format and unit settings.
Time Format: Select between 24& 12 hour format. .
Set your preferred units and time formats, and tap.
Allow time format to be switched between 12 and 24 hour formats. .
SECoND TiME ZoNE, 12/24 TiME FoRMAT sETUP.
Adjust the time format(12H/ 24H) by pressing the“SKIP+” or“SKIP-” button.
The LCD display q now shows"TIME" and the time format(24 HR) blinks.
Date& Time Format: Selects the date and time display format.
Press NEXT() button switch andselect 12-hours/24-hours time format.
If you have chosen the 12-hour time format, the screen(5) will display the.
T Press the Clock button to confirm the time format. 00.
To switch between the 12 or 24h time format, push the SET button located under the cover.
You can use the'UP'(13) or'DOWN'(15)buttons to set the time format.
Time Format From the drop-down list, select 12(12-hour clock) or 24 24-hour clock.
Press the“SLEEP/ TIME SET” button to confirm the time format, the display will.
Note: when 12-hour time format is selected, the P(PM) icon will appear on the lower middle time display to indicate the afternoon time; there is no AM indicator.
Press SET button after desired time set and goes to time format set mode.
Note: when 12-hour time format is selected, the PM icon will appear on the upper left time display to indicate the afternoon time; there is no AM indicator.
You may set the date,time zone, time, time format and date format etc. in the menu.
In Clock mode, press andhold the MODE ENTER button for 2 seconds to enter the time setting mode. The time format 12Hr/24Hr will blink.
Legends of the time scale adges are in the time format: day. month. year NewLine hour: minute: second.
Note: when 12-hour time format is selected, the P(PM) icon will appear on the lower middle time display to indicate the afternoon time; there is no AM indicator.
Seeing Time not only asks how to see time but also how to(properly)see time formats- natural as well as simulated.
Setting the time format In the Set 12/24 Hrs submenu, you can enable the 12 or 24 hour format.> Press the MENU button and use the t or u buttons to select the[Time] entry.
Radio-controlled time- displays in 24 or12 hour format refer“Time format” in SETUP mode for setting.
Setting the time format In the Set 12/24 hrs. submenu you can activate the 12- or 24-hour format.> In the System> Time submenu, select the[Set 12/24 hrs.] item.
By next pressing sET/ ALM sET button, time figures change into 24Hr and flash.To select 12/24 time format, press+/- button. While 12Hr option is selected, AM/ PM indicator is shown.