Examples of using Multifunction display in English and their translations into Danish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
Then connect to your Multifunction Display via Wi-Fi.
Multifunction display provides fast and accurate monitoring truck status.
Identify the 38400 baud, NMEA0183 wires on your multifunction display. 3.
All aSeries Multifunction Displays now have Wi-Fi as standard.
The 38400 baud wires connect to appropriate Raymarine multifunction display.
Stay in command of your Multifunction Display without letting go of the wheel!
It allows the connection of up to six Zeus2 multifunction displays.
This multifunction display ES75(E70263) was used in our yard as a demo device.
Harness the full power of Raymarine navigation technologies with eSeries multifunction displays.
Network Multifunction Displays- Chartplotter, Radar, Fishfinder, Thermal and much more….
Designed to be combined with the new Raymarine e-Series and c-Series multifunction displays.
Refer to the handbook for your multifunction display for information on using your AIS.
The multifunction display shows all functions and the current battery charge status at a glance.
Raymarine aSeries Ordering Information All aSeries Multifunction Displays now have Wi-Fi as standard.
Multifunction Display with built-in sonar E70167 a77 7" Multifunction Display with built-in sonar and Wi-Fi.
Due to a new model, we sell this fully functional and new multifunction display at a special price.
SWITCH OFF all associated multifunction displays, otherwise you will not be able to correctly configure your AIS transceiver.
The CP100 network sonar module brings CHIRP DownVision technology to Raymarine's multifunction displays.
It allows the connection of up to six evo2 NSS multifunction displays and allows the display of machine data.
However, for best performance,we recommend that you have the latest software installed for your networked multifunction display.
You can connect your transceiver to your VHF radio set and a multifunction display using the NMEA connections on the power/data cable.
To that shown above if this is the case then ensure you have connected the correct signals e.g. IN- on the AIS connects to OUT- on your Multifunction display and so on.
You can connect your AIS unit to a multifunction display using either the dedicated SeaTalk ng connector or NMEA0183(high baud rate) via the power/data cable.
Using AIS The exact method of using AIS depends on which type of Raymarine multifunction display you are using.
Powerful, go-anywhere navigation;aSeries multifunction displays deliver the speed and simplicity of LightHouse II in a fast and fluid touch screen experience.
The Ray260 handset andspeaker are the perfect match to Raymarine's latest generation multifunction displays and instrument systems.
If your multifunction displays are NOT connected to a SeaTalk ng system, connect the AIS unit's 38400 baud, NMEA0183 bus to your multifunction display's 38400 baud, NMEA0183 wires.
The SeaTalk ng connector enables you to connect the AIS unit,aboard vessels on which the multifunction displays are connected via SeaTalk ng.
Note that your multifunction display must be running Raymarine's LightHouse II software and that some autopilot functionality may not be available if your system does not include a dedicated autopilot control head.
We strongly recommend that, for best performance and the latest features,you upgrade your multifunction display to the latest version available.