Examples of using Setting range in English and their translations into Dutch
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Reference clearances and/or setting range 1.
The setting range is adjustable from 0.2- 0.9 bar.
Indication of recommended setting range.
Setting range determined by dp:
Sterilization time setting range.
Setting range to 60,000 Nm(higher torques on request).
Intelligent fence: Automatic alarm out of setting range.
Setting range thermostat -0 to+ 40° C freely adjustable.
Fixed Condition time setting range: 0- 999 H 59 MIN.
Setting range: -12- +12 dB See the proc edure on page 71.
Backlight brightness Setting range: 5 different levels available.
Setting range: 0 to 9 minutes in 10-second increments ex works 0.
Instruction of technical parameters, as well as their setting ranges.
Setting range: Same as“Right pedal function assignment”(page 96).
Repeatability of the set point≤ 1% of end of setting range.
Ex works 20 min Setting range: 0 to 99 minutes in increments of 1 min.
Error is displayed if values outside the setting range are entered.
Setting range: 0- 90 min in 1min steps(ex works 60min) STT Starting time.
Macro setting: Macro setting of insert within 1 mm(0.039 inch) setting range.
Temperature setting range: 4 to 35 °C. Wash solvent delivery by syringe.
permits a wider range of inks thanks to an improved setting range for ink density on different printing stocks.
It offers a setting range from 1 to 8 ampere with a very small overall width.
Setting range: S1 to S6 GBS Radiation sensor GBS 01- non-standard accessory: Indicates a sensor input if a radiation sensor is used.
Ex works 5 min Setting range: 0 to 99 minutes in increments of 1 min PRT P ump run-time of low-priority.
Setting range: Combinations of all outputs(ex works OP1)
Setting range: 1 to 7 days(ex works 7 days) Time by which the set outputs are switched on(ex works 15.00) Setting range: 00.00 to 23.50 in 10 min increments PRT P ump run time in seconds.
Outlet pressure set range standard Wh: 15-70 mbar.
Set range for 340 yards.
Set range at 310 yards. Yes.
Set range at 310 yards.