Examples of using Current and voltage in English and their translations into Finnish
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
S Long-term with the uneven distribution of current and voltage.
Outputs from the solver include current and voltage distributions, CGand RL matrices.
Here A, B Comparison of the power represented in values or current and voltage values.
Which can measure transformer, current and voltage transformers etc inductive DC resistance.
Automatically assign the appropriate interface device according to the current and voltage.
Finds the best combination of supply current and voltage to maximize the power output.
The current and voltage can reach 200% working point, which is very suitable for the power metering department.
Bar charts show harmonic ratios of current and voltage of each phase.
It is recommended to use small power circuit type(Au cladding contact)when using small current and voltage.
The left and right convergence, the current and voltage performance is more stable.
The Mini USB cable 60cm is use AWG20 cables,it can help device to make more current and voltage.
For switch, especially the micro switch, the current and voltage response action is very sensitive.
The current and voltage reverse direction, forming aharmonic oscillatorbetween theinductanceand capacitance.
Single-phase 220V, 1KW, float flowmeter equipped, current and voltage digisplay.
When using at low current and voltage, it is recommended to use a low power circuit type Au cladding contact.
A: Titanium anode could be used for many industries, different industries have different suitable current and voltage take the following into consideration.
Engineers must know the rated current and voltage(AC or DC) required for a specific application to select the appropriate switch.
The end of the digital input is hung, so the common end of the digital input is separated from the Common End UN, IN of current and voltage parts.
Periodic detection of circuit voltage and current, the current and voltage in the circuit have a very large impact on the micro-switch original.
High precision D/A converter is employed for ensuring the precision and linearity of current and voltage in the whole range.
The current and voltage tends to oscillateand may reverse direction several times, with each peak being lower than the previous, until the system reaches an equilibrium.
Monitor: It's monitoring the power supply data,includes single-phase and 3-phase; current and voltage status; remote/local control mode.
However, when there is no obvious abnormality in current and voltage, the internal clamp or the screw of the pressing core may be loose, resulting in increased vibration of the silicon steel sheet.
In order to make the internal resistance measurement result of the battery objective, the influence of the battery capacitance on the measurement result should be removed by analytical method according to the phase relationship between the measurement signal current and voltage, so that the measurement result is independent of the measurement signal frequency, that is, at any measurement signal frequency.
The current and voltage sampling values of the microcomputer relay protection tester are recorded once a week, and the differential current value is recorded for the differential protection.
C, over-current voltage protection: boot device can automatically detect current and voltage values, you can immediately detect non-normal conditions to protect the transmitter circuit.
For phase current and voltage, we persist in adopting high performance linear amplifier output mode in order to make the current and voltage source to directly output all kinds of waveforms from the DC waveform to the waveforms including all kinds of frequency components, such as square wave, combined waveform overlapped by each order harmonic, fault transient waveform, etc.
Manufacturer of high voltage electromechanical and reed relays,high current and voltage switches, vacuum contactorsand circuit breakers, and, measurement and isolation equipment.
At present, the R& D of Chinese micro switch manufacturers is devoted to improving the durability of good s,increasing rated current and voltage, reducing working pressureand prolonging the service life of good s. In terms of product life cycle, it is generally higher than 1 million, and the enterprise's goal is try to increase up to 3 million even 200 times. Huizhou Greetech Electronics Co., Ltd.
In R"λ/2π far as the regional district, the electromagnetic fields in the region to leave the conductor to the dissemination of space,it changes relative to the conductor on the current and voltage will be some time lag, when the electromagnetic waves spread out and no longer Wire on the current, voltage direct links,and this region of the electromagnetic fields known as the radiation field.