Examples of using Forging process in English and their translations into French
{-}
-
Colloquial
-
Official
Roll forging process can be divided into two types.
Annual Capacity with Open Die Forging Process: 30,000tons.
The forging process gives a much higher density to the material.
The manufacturing process of the Swage Nipple is the forging process.
The aluminum alloy valve body adopts hot forging process, small volume and fine appearance.
It is important to control the quality of products in the forging process.
During the forging process, the material is stamped with.
The body of the medium- high- pressure specification is manufactured by forging process.
Most such gases are eliminated when the forging process is executed correctly.
TEL(TUSAS Engine Industries Inc.) has chosen FORGE® to simulate its hot forging process.
Abstract: During a forging process, components undergo complex large strains.
Setforge provides high-quality isothermal forging process for aluminum alloys.
The forging process keeps the set life of the Cutlery longer and more durable.
At the back of the knife, you can still see the pure evidence of the forging process of carbon steel.
For a good execution of the forging process, ETMA follows a procedure that consist in the following steps.
The methodology uses two systems in the upstream and the downstream of the forging process.
As all manufacturers of links know, this forging process has several drawbacks.
Hammers, presses andupsetters are the basic types of equipment used in the forging process.
Cold forging process is one of the new processes of metal process without machining.
The medium andhigh pressure valve body is produced by forging process.
Tungsten copper blank forging process, the deformation of the matrix material, there are two ways.
This creates a forging process that is identical to folding the steel of a katana tens of thousands of times.
Consistent strength anddurability are qualities that can be achieved through the forging process.
The forging process builds fine particle structures and improves the physical properties of the metal.
The body of medium andhigh-pressure specification is manufactured by forging process.
The forging process, as set forth in claim 6, wherein the temperature of the link(1) is stabilized at approximately 830° C.
It presents good corrosion resistance andis well-adapted to the forging process, and also to milling operations.
The forging process is associated with the emergence of natural volumetric defects such as inclusions and porosities.
With good toughness and hardness,they are widely used in the forging process of all kinds of moulds.