Examples of using Phosphate buffer solution in English and their translations into French
{-}
-
Colloquial
-
Official
Phosphate buffer solution.
The aqueous phase is poured into 1.5 l of a phosphate buffer solution of pH 2.
Solvent: Phosphate buffer solution.
The reaction medium is washed with water then with a phosphate buffer solution at pH=7.
Phosphate buffer solution Lyophilisate: Whitish freeze-dried lyophilisate.
The entire process is conducted in a phosphate buffer solution(PBS) at a pH of 7.4.
Sterile phosphate buffer solution(4.9%) for the quick neutralisation of acids and alkali.
The gel thus purified is placed in equilibrium in a phosphate buffer solution at pH 7.2;
Succinate or phosphate buffer solutions containing Kathon, Régilait and EDTA are preferred.
Preferably, the buffer solution that is selected is a phosphate buffer solution.
For the dilution, the same phosphate buffer solution described above is used.
The plate is incubated for 45 minutes at room temperature and washed with the phosphate buffer solution.
It may be a buffer solution such as a phosphate buffer solution with a pH value of 6.
The phosphate buffer solution used was a 50 mM aqueous solution of KH 2 PO 4 of pH 6.
The crosslinked product is neutralized to pH 7.2 in a phosphate buffer solution and then dialyzed.
Description: Sterile phosphate buffer solution(4,9%) for fast and effective neutralisation of acids and alkalis.
The aqueous solutions used were 0.1M phosphate buffer solutions of pH 7.4.
An ammonium phosphate buffer solution with a phosphate ion concentration of 100 mM, the pH adjusted to 9 with aqueous ammonia.
The dissolution medium consisted of 500 ml of a phosphate buffer solution at pH 5.8.
The use of a succinate or phosphate buffer solution containing Kathon®, Régilait® and EDTA is preferred.
The plates are incubated for 45 minutes at room temperature and washed with the phosphate buffer solution mentioned above.
All phosphate buffer solutions(pH 7.2) containing the desired concentrations of antioxidants(from 0 to 40 µM) are prepared extemporaneously.
At least 60% of the polymers shall be soluble in a phosphate buffer solution with a pH of 7,5 at 100 ºC.
The NAs were extracted with dichloromethane followed by a clean-up with phosphate buffer solution pH 7.0.
The aqueous solutions used were 0.1 M phosphate buffer solutions of pH 7.4, 8.4, 9.4, 10.4, and 11.4, pH 11.
When a concentration higher than 800 ppm is required,the GA3 must be dissolved in a phosphate buffer solution.
The mixture was dialyzed against the 100 mM, pH 7.4 phosphate buffer solution, changing the dialysis liquid several times.
Item Product description Bottle Bottle with sterile sterile phosphate buffer solution for immediate rinsing of eyes at accident site.
Phosphate buffered solution(PBS):- Potassium chloride- Disodium phosphate dodecahydrate- Potassium dihydrogen phosphate. .
Phosphate buffered solution(PBS).