Examples of using Programming procedure in English and their translations into French
{-}
-
Colloquial
-
Official
The programming procedure is complex.
If so indicated repeat the programming procedure above.
For the programming procedure see Table 6.
Follow Steps 2 through 4 of the programming procedure.
TABLE 6- Programming procedure level one functions.
Create a new program following the programming procedure.
TABLE 7- Programming procedure level two functions.
Reset the remote control by repeating the programming procedure.
TABLE 4- Programming procedure first level functions.
For this purpose start the programming procedure as follows.
TABLE 6- Programming procedure second level functions.
Simply to set,easy to read programming procedure on LCD.
The programming procedure can follow two different models.
IMPORTANT: set the dip switch before each individual programming procedure.
At step 4 in the programming procedure see previous page.
The errors which are found by the intercom interface during the programming procedure are as follows.
Use the Programming procedure to change the Icon associated with a push.
THE DEVELOPMENT OF THE MULTIANNUAL MICROPROJECT PROGRAMMES A programming procedure that is iterative, flexible and appropriate 8.
Intuitive programming procedure using the keys on the back of the transmitter.
If you pause too long between the individual steps,the signal will turn off the programming procedure on its own.