Examples of using Pull the switch trigger in English and their translations into French
{-}
-
Colloquial
-
Official
Pull the switch trigger, and then release it.
To start the tool,simply pull the switch trigger.
Pull the switch trigger, and then release it.
Press the lock-off lever,then pull the switch trigger.
Pull the switch trigger to start the tool.
To set the first digit, pull the switch trigger and then release it.
Pull the switch trigger to spray paint.
To start the tool, simply pull the switch trigger in the B direction.
Pull the switch trigger to turn on the light.
To check the remaining battery capacity,slightly pull the switch trigger.
Never pull the switch trigger while the tip of the. .
To start the tool, push in thelock-offbutton and pull the switch trigger.
To set the second digit, pull the switch trigger and then release it.
Position the bit at the location to be chipped,then pull the switch trigger.
If you pull the switch trigger, the motor runs again but stops soon.
To start the equipment,depress the lock-off button and pull the switch trigger.
If you pull the switch trigger, the motor runs again but stops soon.
To start the tool,depress the lock-off button and pull the switch trigger.
For continuous operation, pull the switch trigger and then push in the lock on button.
Position the bit at the desired location for the hole,then pull the switch trigger.
Once push drive is activated, pull the switch trigger and then push the lock button.
Pull the switch trigger while keeping the tip of the saw blade apart from the material Fig. 24, Fig. 25.
For continuous operation, pull the switch trigger and then push in the lock lever.
Pull the switch trigger after the main power switch is turned on and the chain brake is released.
With the lamp button in the ON status, pull the switch trigger to turn on the lamp.
Never pull the switch trigger while the tip of the saw blade is pressed against the material.
To cancel the unintentional restart proof, pull the switch trigger fully, then release it.
When you pull the switch trigger, the LED display shows the remaining battery capacity as the following table.
To stop the tool from the locked position, pull the switch trigger fully, then release it.
For the final setting, pull the switch trigger while pressing the indication button.