Examples of using Attenuator in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Power attenuator for speaker cabinets.
Very compact rectangular attenuator.
Attenuator tuning is a main concern.
High/low input sensitivity switch, attenuator off on.
Attenuator with recessed connection for rectangular ducts.
People also translate
What is a Fiber Optic Attenuator and what is it used for?
Big attenuator at the IF input for input power up to 5 watts.
Audio volume is controlled by the attenuator P1 at the antenna terminal.
Bigger attenuator at the IF input for input power up to 5 watts.
This is supported by a built-in AGC, a pre-amplifier and an attenuator.
The 4 level attenuator can be set to 0 to 30dB in 10dB steps.
But I think booster there is something like resistor-based attenuator with bypass switch.
Integral attenuator for demanding acoustic requirements.
The volume logarithmic adjustment is already performed by the attenuator built into the amplifier.
Integral attenuator with at least 26 dB insertion loss at 250 Hz.
The Viavi OLTS-85/ 85P is an efficient andeasy-to-use Optical Attenuator for Tier 1 fiber certification.
Attenuator with incredible durability and precision was developed.
For audio power setting an attenuator potentiometer at the antenna input is recommended.
Set the attenuator ZONE ATTENUATORS(6) of the zone to be provided with the sound of the highest volume to position 5.
Every BlueOptics SFA21BK9 9dB LC/PC Fiber Attenuator is covered by a 25-year function warranty by CBO.
Optical attenuator(manual or galvo-powered) for polarized laser radiation.
The Mesa Boogie is also equipped with a high frequency horn and premium attenuator, allowing players to adjust their tone for a more personalised performance.
Integral attenuator with at least 26 dB insertion loss at 250 Hz.
Please note:When using a PicoScope 4225 or 4425 oscilloscope the attenuator is not normally needed for measuring injectors as the voltage spike is usually under 200V.
Variable attenuator for beam profiler in the ray analysis with 99 different attenuation values in the range of 1010-0 0 to 100 dB.
Product Description Fiber Optic Attenuator is a passive device used to reduce the amplitude of a light signal without significantly.
The 10dB attenuator can now be hooked up by setting the menu entry"Atten" to 10dB.
Timebase, attenuator and persistence settings may be altered by the user.
The PoS100 attenuator is the steady further development of the PoS50 and provides a simple construction and simple handling together with a high power rating.
A 5 dB optical attenuator should be inserted between the fiber-optic cable and the receiving port on the SFP at each end of the link for back-to-back connectivity.