Examples of using Auto reset in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Grey with auto reset chip.
Maximum and minimum values with auto reset.
Manual reset/ auto reset: selectable by wiring.
Oh, yeah.I put a 1 1 5-volt ball-bearing motor with an auto reset.
The double spring auto reset system is preloaded for 455 kg.
The controller is carrying out an auto tuning or an auto reset.
Auto reset key switch(185 n) Menu item Setting Meaning 185 0 OFF 1 ON.
Grey cartridge with auto reset chip.
Select/tick the Auto Reset option if you want to apply the function.
Factory setting: auto tuning and auto reset deactivated.
Auto Reset determines if the RCD will auto-reset itself and if so, after how many clocks 16, 24 or 32 clocks.
Braked axle(+/- 24°) with auto reset Hydraulic land levelling.
Included in delivery: 4 refillable ink cartridges with auto reset chip empty.
UP to 10 Daily Alarms auto reset- repeats every day at the same time.
Once the chip has been removed, you can position the auto reset chip in its place.
During the 4 minutes in which the auto reset is being carried out, no setting parameters can be adjusted.
At the VibraLITE 3 andVibraLITE 8 models the timer is defined as an auto reset countdown timer.
Auto reset can only be carried out with PD and P control modes not possible with PID, PI and ON/OFF control modes.
Activation of AT(auto tuning)[AF] or auto reset(offset correction) rhEF.
Once the auto reset is finished, the AT control indicator goes out and all setting parameters can be adjusted again.
The saved settings will be reapplied when an Auto Reset is triggered see above.
After activating auto reset, the AT-control indicator starts to flash, the controller switches to the actual value/set point display and auto reset is carried out the correction value determined will be set automatically.
NOTE: New destinations and media profiles are not affected or lost when Auto Reset is applied.
Increase external watchdog function will auto reset when Ethernet serial server or power fail.
AT Auto tuning The yellowLED blinks when the auto tuning or the auto reset function is activated.
