Examples of using Bottom position in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Bottom position for the adventurous lovers.
Fit the additional handle(9) in the bottom position.
Slide control to the bottom position minimum channel level.
Set the thicknessing table(7) to bottom position.
BOTTOM POSITION: In this position the scrub pressure is approximately 30 pounds less.
Transport working knob is in bottom position.
Slide this knob to BOTTOM position to move the machine and park the machine.
Minimum reinforcement of 2 Ø 12 for the upper and bottom positions.
If the bottom positions are filled, you will be provided with the option to hold 1 or 2 reels.
Set the hole(10) on the retainer ring(3) at the bottom position by.
Move the selector switch to the bottom position to select object temperature measurement mode.
Jammed nail and driver blade are stuck in the bottom position.
Furthermore, damaged goods in bottom positions can be exchanged without elaborate destacking and upstacking.
The support wheels always have to be attached in the bottom position.
With the choke lever(Fig 4.1) in the bottom position, start the engine until it starts audible and briefly ignition.
Resetting the frame:Press the DOWN button and adjust the frame to bottom position.
After locking the locking knob(26- Fig. 4) in the bottom position, lift the mitre saw by the handle 2- Fig. 4.
Has the mixing bowl been properly fi tted and has the mixing arm locked into the bottom position?
Adjust the Scrub Pressure Lever(23) to either the top or bottom position depending on how much down pressure you require.
Perhaps you switched off the alarm function by setting the control lever to the bottom position.
They are lowered to the bottom position when the capture arm bar runs up against the stops on the side-mounted guide rails.
This follows from the text information, available at the bottom positions on the channel 13° E.
Dip switch MIRROR in the bottom position inverted representation Dip switch MIRROR in the above position normal representation.
Then the cylinder cooled, that skondensirovat steam and to return the piston in the bottom position.
Note- By default, SCSI address 0 is assigned to the drive in the bottom position, and SCSI address 1 is assigned to the drive in the top position. .
At the start of the free games a Wild symbol is placed at random in the top,middle and bottom position of reels 2, 3 or 4.
Push the control lever for the throttle/pitch function to the bottom position and switch on the transmitter.
With seats occupied, the respectivehead rests must be correctly set(may not be in the bottom position)- risk of fatal injury!
Example Comb attachment 16-18 mm: Top position(0.5 mm): shorter hair(16 mm) Central position(1.5 mm):17 mm Bottom position(2.5 mm): longer hair 18 mm.
With seats occupied, the respective head rests must be installed andcorrectly set(may not be in the bottom position)- there is a risk of fatal injury!