Examples of using Buffer size in English and their translations into German
{-}
-
Computer
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Programming
-
Official/political
-
Political
Manual writing buffer size.
What buffer size is your DAW set to?
Description: TCP receive buffer size.
Set the buffer size to a lower value.
See rs485_set_buffer_config() for buffer size configuration.
The buffer size is depending on the port used.
Lowest usable buffer size: 256 ms.
Buffer size in your software is set too high.
Size(optional) The buffer size in bytes.
The buffer size for comments in the case report has been increased.
Setting this to 16 gives a buffer size of 2^16 64 kB.
Buffer size can be set 64/128/256/512/1024, Windows only.
Unable to set buffer size%lu for playback:%s.
Use the cursor keys to move to and select the Frame buffer size menu.
Set your own buffer size and buffer count.
Remedies: If you use a radio, check its manual to see if the buffer size can be adjusted.
No Lowest usable buffer size: from 256 to 2048.
Live Buffer Size[kbyte]- Sets the size(in kilobytes) of the live buffer for the stream.
The lowest available DMA Buffer Size should be active.
No Lowest usable buffer size: 128 Samples Comments: All in all a slightly better performance than the FF 400.
See SetBufferConfig() for buffer size configuration.
Lowest usable buffer size: 128 Comments: DPC latency ca. 250us, no DPC latency peaks.
The returned array contains the elements send_buffer_size and receive_buffer_size.
Lowest usable buffer size: Je nach Projekt 64-512 Samples.
The returned namedtuple has the variables send_buffer_size and receive_buffer_size.
A: Increase the Buffer Size in the serial settings of the Amiga preferences.
By default, Video Cloud uses cookie-based bandwidth detection toselect the initial rendition to deliver and set the buffer size.
Lowest usable buffer size: 64 Samples with Logic, 32 also possible, but seems not so safe to me.
For AE-1 and AE-2 compatibility, the buffer size must be a multiple of 16 bytes except for the last buffer, which may be smaller.
Post Alarm Buffer Size[kbyte]- Sets the portion of the alarm buffer(in kilobytes) that will be used for"post alarm" image storage.