Examples of using Feed size in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Max. feed size depends on material.
For equipment from 14,5 to 23 cm feed size.
Feed size 0- 750 mm(concrete), 0- 600 mm asphalt.
Sample quantities up to 450 ml, max. feed size up to 10 mm.
Feed size« 15 mm, sample throughput of up to 15 l/h and more.
It is currently used to crush soft rock with a feed size to 500 mm.
The feed size is typically between 0 and 100 mm Fig.
The gold recoveries show a positive trend with smaller feed size.
It is capable of handling larger feed sizes and has an output potential of up to 800 t/h 881 US t/h.
For final finenesses of between 10 and 20 μm, with a feed size of 6- 8 mm and a max.
For a feed size of 0-500 mm, the machine driven by a CAT-C7 motor operates at a crushing rate up to 300 t/h.
Capacities of these jigs are- depending on the feed size- between 60 and 30 t/h.
There it crushes hard rock, the feed size ranges between 2 and 170 mm and, depending on the material, the production rate reaches 250 t/h.
The plant isgoing to process up to 2500 t/h of limestone with a feed size of up to 2000 mm.
Maximum feed size of medium course 190 mm and extra course 220 mm with a 65 mm standard long throw at 300 hp and optional 50 mm short throw at 250 hp.
This is obvious in this application:270 t/h processed asphalt with a feed size up to 1000 mm.
The impact crusher SMR 10/10/4 processes diabas with a feed size of 8/60 mm at a throughput capacity of 200 t/h and produces cubic high-grade chippings up to 22 mm.
At the heart of the UJ310 is the single-toggle CJ411 jaw crusher with a large opening of 1045 x 840 mm andmaximum feed size of 750 mm.
This gives users the fullrange of opportunities for optimal sample preparation with a feed size of up to 95 mm and final fineness of down to 0.05 mm- all in a single step.
The results indicate that recovery is not rock type dependent butshow a marked improvement with smaller feed size.
With a feed size of up to 900 mm, the STE 100.65T achieves a throughput of up to 200 t/h, depending on the desired product size that varies between 0/70 and 0/200 mm.
By the way: FRITSCH offers 6 different models of Cutting Mills with comprehensive accessories,a max. feed size from 70 x 70 mm- 120 x 85 mm, a max.
Your advantage: optimal continuous pre- and fine-grinding with a feed size of up to 95 mm down to a final fineness of 0.05 mm in a single step with integrated Riffle Sample Splitter!
Feed size up to 10 mm With two grinding stations, we have developed the NEW FRITSCH Planetary Mill PULVERISETTE 6 premium line as the‘big sister' to the PULVERISETTE 7 premium line.
By choosing different grid mesh sizes, we can also easily adjust and control the feed size to the screen," notes Massimo Renzi, responsible for recycling.
If the cause of the faulthas been eliminated(eg. too large feed size or too much material to be ground in the grinding bowl), the circuit breaker can again be without a waiting period with the supplied reset pin is turned on.
The document„Grinding jar ball charge" provides details about the usable volume of the grinding jars,maximum feed size and correct filling with grinding balls for dry and wet grinding, as well as for cell disruption.
The document"Grinding Jar Ball Charge" in the Downloads section provides details about usable volumes,maximum feed sizes and correct filling of the jars with grinding balls for dry and wet milling as well as cell disruption.
Classical crushing plant for operation in quarries, which is primarily used in limestone and is equally suited as primary crusher for feed sizes of up to1,300 mm(with SHH 17/100 crusher), and- with the feed size reduced accordingly- for the production of final aggregate fractions with SHB 17/100 crusher.
