Examples of using Flash rate in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Flash rate adjustable 1-8 flashes/sec.
Strobe effects, and adjustable flash rate.
Flash rate steplessly adjustable 1-12 flashes/sec.
Features easy to use LED strobe flash rate.
Steady flash rate for all LED and incandescent loads.
DMX-512 standard control 2 channels: brightness and flash rate.
LUX at a flash rate of 6,000 flashes per minute.
Bright, even light with two user-defined flash rates.
The flash rate for the stroboscope mode is indicated with.
The button with an incremental encoder adjusts the flash rate.
Features Brightness, flash rate and flash duration adjustable.
Attracts maximum attention due to adjustable flash rates.
The flash rate is adjustable between 0 Hz(permanent light) and approx.
Choice of three different flash combinations with fast flash rate.
The flash rate, sound type and volume are selected using DIP switches.
Stroboflash and adjust the flash rate via the rotary control knob 6.
Flash rates of up to 12 500 flashes per minute cover a wide range of applications.
Daylight off, intensity, flash rate and burst flashes selectable.
Use the button ENTER to select the four setting options one after the other,and use the button UP or DOWN to set the brightness or flash rate.
To adjust the flash rate in stroboscope mode or the microphone sensitivity for sound control.
Do not use the buttonMENU to exit the menu item for the brightness or the flash rate before switching off the spotlight.
The brightness and flash rate settings made at the master unit will be automatically transferred to the slave units.
For independent operation, use the control buttons(8) to set the brightness,to activate the stroboscope function and to set the flash rate.
Do not exit the menu item for a colour or the flash rate with the button MENU before switching off the spotlight.
The flash rate and the flash intensity of the stroboscope can be controlled via a light controller with DMX512 protocol see chapters 8.1+ 8.2 and the table in chapter 10.1.
LED flashing automatic sequence of the programmed flash patterns;the button FUNCTION is used to switch over between three flash rates(press button shortly) and three flash intensities keep the button pressed for a longer time.
From luminous intensity to light colour and flash rate down to signalling sector and mounting location- the European standard(EN) 54-23 accurately specifies the requirements that visual alarm devices(VADs) have to meet.
Flash-to-flash stability is< 1% and the flash rate is 500 Hz. Jaz-PX has an SMA 905 connector that couples to Ocean Optics accessories, including optical fibers, cuvette holders, probes and other sampling optics.
Digital Flash with 180 Ws, compact like a system flash, quick recharging time(0.05 to 2.6 seconds)and high flashing rate(max. 900), electric power supply via walimex pro Powerblock, incl.
Digital flash with 180Ws, compact like a system flash, quick recharging time(0.05 to 2.6 seconds)and high flashing rate(max. 900), electric power supply via walimex pro Powerblock II or Power Porta, incl.