Examples of using Intermodulation in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Low PIM-behaviour passive intermodulation.
Intermodulation: At least 35 dB below peak output at 1500W.
Linear power amplifier, Effectively suppress intermodulation and stray.
Intermodulation must be avoided in order to eliminate interferences in the network.
Power Medium frequency- 200-watt, Class AB, push pull, low intermodulation design.
People also translate
The intermodulation between channels was found to be so low as to be hardly measurable.
Need help avoiding passive intermodulation(PIM) in your LTE wireless network?
The Cluster Connector has a plastic housing, because we know from experience that metalcontacts can be more susceptible to intermodulation.
Reduce passive intermodulation and unlock your network potential.
Our completely weatherproof surge arrestors and components feature low return loss,low insertion loss and low passive intermodulation PIM.
The advantage is that the antenna produces no intermodulation or other internally generated disturbing components.
Passive Intermodulation(PIM) is a thief in wireless networks, stealing coverage, capacity and performance.
With the AdcTester you can control the gain, background noise and intermodulation between channels, both the Adc to 8 and 16 bit, and those in 24 bit.
Passive Intermodulation(PIM) is a nonlinear response of two or more signals of different frequencies mixing together in a passive device, e. g.
The effects are in the percentage range depending on the cable, but they may even causegreater impact than equally large harmonic and intermodulation distortions.
Excellent passive intermodulation behaviour- Very low passive intermodulation- Independent of torque and coupling mechanism.
With our Teletilt RET system, operators can optimize their beam through tighter RF containment,precise pattern control, intermodulation suppression and real-time flexibility.
Traditional static passive intermodulation(PIM) testing alone cannot predict how RF path components will react to environmental factors.
The fast operation of the mosfets gives both a treble transparencyonly achieved by the valve amplifiers and a very low TIM Transient Intermodulation Distortion.
Intermodulation(IM) or intermodulation distortion(IMD) is the amplitude modulation of signals containing two or more different frequencies in a system with nonlinearities.
Strong or near-by transmitters in the long-or medium wave range can cause interferences and intermodulation in the shortwave range, which can effectively be suppressed with this filter.
Passive Intermodulation(PIM) is a non-linear response of two or more signals of different frequencies mixing together in a passive device, e.g., antenna, cable, connector or splitter.
This results in the need for a connector that has been specially developed for radios and antennas with smaller footprints andoffers excellent passive intermodulation, return loss and RF characteristics.
Passive intermodulation can cause a problem whenever strong and weak signals with slightly deviating frequencies are transmitted, caused by minute quantities of ferromagnetic materials, for example.
Note that many electronic products, such as DIN heads, N heads, no longer use nickel to make the base, mainly because nickel is magnetic,which will affect passive intermodulation in electrical performance.
Whether it's attenuation or RF leakage caused by poorly constructed cables-or passive intermodulation(PIM) caused by tower stress or faulty installation-even the most modern antennas and radios can't deliver superior performance when your RF transmission systems aren't up to par.
While small cell architecture is the ideal approach to increase capacity where spectrum is expensive and limited,it is more susceptible to RF losses and passive intermodulation(PIM), potentially undercutting the very benefits it is designed to promote.
A new catalogsupplies Rosenberger's updated range of Passive Intermodulation Analyzers(PIA). There are available rack versions, with broadband amplifiers, exchangeable filter units and multiplexers, as well as site and desktop analyzers- integrated in waterproof cases and transportable for measurements in the field. Terminations, adaptors and test cables complete the product portfolio. All analyzers are offered for measurements in various frequency bands.
This includes spectrum analysis, especially for pulsed and modulated signals with a high crest factor, frequency-converting measurements, characterization of the phasenoise of oscillators as well as passive intermodulation PIM, non-linear effect on components at high power in mobile radio base stations as well as assemblies in satellites.
Input level/ impedance: +20dBu unbalanced/ 40kΩ Max. output level/ impedance: +20dBu unbalanced/ 40Ω Common mode rejection(CMRR):>40dB Frequency response: 10-30.000Hz(+/-0.5dB) THD(A)+ noise:0.005% +4dB IMD Intermodulation distortion: 0.01% +10dB S/N Ratio(IHF-A):>94dB(20-20.000Hz) Crosstalk@20kHz:> -83dBu Power Supply: AC 230 V, 50Hz Power Consumption: 10W Fuse: 0.5A slow blow Dimensions: 482(W) x 44(H) x 154(D) mm Weight: 1Kgs.