Examples of using Intermodulation in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Low Passive Intermodulation.
Intermodulation suppression:≥65dB.
The measurement of intermodulation distortion.
Intermodulation Products≤ -160 dBc(3rd order with 2×20W).
Adopt the world's most advanced high linearity,low intermodulation LDMOS power amplifier.
People also translate
Telsto RF Adapter has an operational frequency range of DC-3 GHz,offers excellent VSWR performance and Low Passive Intermodulation.
Four-wave mixing can be compared to the intermodulation distortion in standard electrical systems.
Telsto RF Connector has an operational frequency range of DC-3 GHz,offers excellent VSWR performance and Low Passive Intermodulation.
I With the amplified linear power, the intermodulation and spuriousness suppressed effectively.
ZD RF Connector has an operational frequency range of DC-6 GHz,offers excellent VSWR performance and Low Passive Intermodulation.
With the amplified linear power, the intermodulation and spuriousness are suppressed effectively.
The intermodulation occurs just as it did within the wired signal path-that being at the junction of two different metals or junctions of dissimilar materials.
The output signal always includes harmonics, intermodulation distortion(IMD), and other spurious components.
Systems not designed to reproduce ultrasonics typically have much higher levels of distortion above 20kHz,further contributing to intermodulation.
Illustrates the process of intermodulation inside the human ear, but it is somewhat simplified when compared to real program material, such as music.
Better isolation of each driver from signals handled by other drivers,thus reducing intermodulation distortion and overdriving.
The device features excellent spurious, noise, and intermodulation distortion performance, and can directly synthesize signal bandwidths to more than 1GHz.
Two specifications that tend to impose stringent specifications on LO phase noise are the blocking andtwo-tone intermodulation characteristics minimum requirements.
The third-order intermodulation products are the result of inter-mixing(or modulating) the two-tone inputs by the non-linearities in the amplifier or mixer.
The low on resistance and low capacitance of the eGaN FET enables high efficiency andlowers open loop impedance for low Transient Intermodulation Distortion(T-IMD).
The term rusty bolt comes from the fact that in many instances the intermodulation source can be a rusty metallic object such as a mesh fence, a barn, or even a drain pipe.
It should be noted that the priority in these instances is not the cancellation of the PIM artifact,but the pinpointing of where along the transmission path the intermodulation is occurring.
The charge injection, clock feedthrough, intermodulation distortion, and increased overload recovery time that result from the digital switching action can cause problems within poorly designed analog circuits.
In C3EQ, it is configured with only two amplification tubes C3g of high linearity,suppressing harmonic distortion and intermodulation distortion to a minimum while returning non-return.
The SYNC input and SYNC_OUT output of the MAX9759 allow multiple Maxim Class D amplifiers to be cascaded and frequency locked,minimizing interference due to clock intermodulation.
We can then deduce the required LO phase noise using the following equation:The maximum interference power noted in the blocking and two-tone intermodulation test cases is a -46dBm tone at±3.2MHz offset from the desired signal center frequency.
But I also know this is interference in the metropolitan area population in order to prevent jamming writing Pyongyang broadcast listening,it was not the actual signal intermodulation ghost signal.
Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks,each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels.
Note that many electronic products, such as DIN heads, N heads, no longer use nickel to make the base, mainly because nickel is magnetic,which will affect passive intermodulation in electrical performance 3.
Max. 3520 receiving frequencies, adjustable in 25 kHz steps, 20 frequency banks,each with up to 32 factory-preset channels, no intermodulation, 6 frequency banks with up to 32 programmable channels.