Examples of using Multi-mode fiber in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Up to 500m on 50/62.5 m Multi-mode Fiber.
Multi-mode fibers in LC E2000 Duplex Singlemode G. 652.
Up to 200m reach on standard multi-mode fiber.
Multi-mode fibers are also available as parallel optics.
OM3 Special 50 m multi-mode fiber for 10Gbps.
Multi-mode fibers in E2000 E2000 Duplex Singlemode G. 652.
Newer deployments often use laser-optimized 50/125 Âμm multi-mode fiber OM3.
Multi-mode fibers in LC/APC E2000/APC Duplex Singlemode G. 652.
Because of this the light is narrower andcarries higher bandwidth than Multi-mode Fibers.
OM5 Optimized 50 m multi-mode fiber up to 400Gbps data transfers.
In the following,we will look at the existing differences using the example of single-mode and multi-mode fiber patch cord s.
Multi-mode fibers are identified by the OM(optical mode) label.
Distance depending on fiber cable: Up to 2 km with multi-mode fiber, up to 120 km with single-mode fiber. .
Multi-mode fiber patch cords are available in different versions due to their historical development.
In addition to the free-beam version,there are versions available with a single-mode or multi-mode fiber.
Laser optimized multi-mode fiber(LOMMF) is designed for use with 850 nm VCSELs.
The Gigalight 40G QSFP+ to 40G QSFP+ Active Optic Cable(AOC) isdesigned for 40G to 40G interconnect links reach up to 300m over OM3 Multi-Mode Fiber MMF.
Below 2km, you can choose multi-mode fiber, if over 2km, single-mode fiber will be the only way.
The need of a cost-effective optical transceiver whichwould have the same performance over any type of Multi-mode fiber drove the development of the 10GBASE-LRM transceiver variant.
The Multi-mode fiber(MMF) has a much bigger core(50μm) and typically uses a longer wavelength of light.
The Alcatel-Lucent QSFP-4X10G-SR compatible 40GBASE-SR4 Transceiver QSFP Duplex-MPO-MTP QSFP has a receiver(with 850nm) and a transmitter(with 850nm)for the transfer of optical signals via multi-mode fiber, taking the respective transmission protocol into account.
In comparison, multi-mode fiber cabling is considerably more expensive than Cat 6a UTP and the solution overall is not well suited for cost sensitive network edge applications.
BlueOptics Accessories are additional products for the extension andoptimization of optical single- and multi-mode fiber optical networks and are available as attenuators, couplers, pigtails and other fiber accessories in different versions for different requirements.
RS-232 to Multi-Mode Fiber Converter provide users transparent transmission from RS-232 serial port to fiber port, the user need not change the existing software, can send the RS-232 serial signals to long distance stability.
In this category you can find some Gigabit Ethernet SFP modules and 10Gig SFP+ modules which are compatible-coded to devices from the vendor Force10.Wecan offer SFP and SFP+ modules f r Multi-mode fiber with 850nm, SFP modules and SFP+ modules for Single-mode fiber with 1310nm and 1550nm, as well as a Force10 coded Copper/RJ45 SFP module for user applications that require this.
This is mainly because the Multi-mode fiber light is bouncing off the edge of the fiber's walls and scattering across the cable resulting in an unequal distribution of light at the far end of the cable because the light photons that went down the center traveled less distance than those that bounced around the cable.