Examples of using Multi-mode fiber in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Type: Multi-mode Fiber.
The KCO-CFL-08 Series visual fault locatoris used for the measurement in single mode or multi-mode fibers.
Mode: Multi-mode Fiber(MMF).
Users can use different type of SFP modules(single-mode/multi-mode fiber, 1/2 core) as needed.
Compared with multi-mode fiber, it can carry higher bandwidths;
Single-mode fiber provides users with a greater transmission rate in addition to nearly50 times longer distance as opposed to multi-mode fiber.
Multi-mode fibers are described by their core and cladding diameters.
Usually the diameter of the multi-mode fiber is either 50/125 µm or 62.5/125 µm.
Multi-mode fibers may not be suitable for high-speed data transmission.
The Cisco GLC-SX-MM operates on ordinary multi-mode fiber optic link spans of up to 550 m in length.
Multi-mode fiber is generally orange or grey, with a cream or black connector, and a shorter.
SC Fiber Patch Cord consists of a single-mode or multi-mode fiber cord and two connectors, one at each end.
Multi-mode Fiber Patch Cables are a good choice for transmitting data and voice signals over shorter distances.
Extend fiber distance up to 2km for multi-mode fiber and 20-120km for single-mode fiber. .
Multi-mode fibers- Used to transmit many signals per fiber(used in computer networks, local area networks).
OM5 fiber jumper, also known as broadband multi-mode fiber jumper, is suitable for high-bandwidth applications.
Multi-mode fiber is mainly used to transmit across comparatively shorter distances, as the modes are more likely to disperse over longer extents.
It can support four wavelengths on a core of multi-mode fiber, reducing the number of fiber core required to 1/4 of the previous one.
Multi-mode fiber is typically cost effective for inside buildings or corporate campuses while single-mode is better suited for longer distance runs.
If you try to connect a single-mode fiber with a multi-mode fiber, it may result in a 20-dB loss, which is 99% of the total power.
Multi-mode fibers have larger cores(about 2.5 x 10-3 inches or 62.5 microns in diameter) and transmit infrared light(wavelength= 850 to 1,300 nm) from light-emitting diodes(LEDs).
The 1000BASE-SX standard opticsare developed to support lower cost multi-mode fiber runs in horizontal and shorter-length backbone applications.
Both single-mode and multi-mode fiber systems can be used with 10 GbE applications.
According to different classification methods, optical fiber connectors can be divided into different types,which can be divided into single-mode fiber connectors and multi-mode fiber connectors according to different transmission media;
Most applications in which Multi-mode fiber is used, 2 fibers are used(WDM is not normally used on multi-mode fiber).
The light(near infrared) is most often 850nm for shorter distances and1,300nm for longer distances on Multi-mode fiber and 1300nm for single-mode fiber and 1,500nm is used for for longer distances.
Most applications where multi-mode fiber is used, 2 fibers are used(the WDM is not normally used in multimode fiber). .
It doesn't matter if you use copper networks, single-mode fibers, multi-mode fibers, a hybrid of both, or something else entirely, you will find inexpensive SFP unit transceivers, particularly with the GLC-SX-MM model, that may fit into your equipment without having to be a name brand or a particular unit.
Fiber Media Multi-mode: 2KM.
