Examples of using Quickselect in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The QuickSelect 3.0 is transmitter and receiver at the same time.
Highlighted blue: This Quickselect was activated by ShowMe.
The QuickSelect 3.0 has three available EDID tables per HDMI input.
You can individually configure your Quickselect system here.
The QuickSelect 3.0 must only be operated with safety extra-low voltage.
You can use these text fields to send RS232 commands andread the response of the QuickSelect 3.0 chain.
After connecting the QuickSelect 3.0 to the PC, start the above software on it.
The button‚HDMI Out‘ determines which of these inputsis put on the HDMI output of the selected QuickSelect 3.0.
Firmware statuses:- Quickselect 3.0- Valens chip set input- Valens chip set output.
Loox fan for quick preselection Häfele is providing another practical selection aid for the Loox lighting system with the new Loox Quickselect fan.
The QuickSelect 3.0 system does not automatically forward the EDID table of the end device to the picture source.
Select EDID Mode„User“ and click on the LAST Quickselect modul in the GUI to mark it with a red frame.
Here, the QuickSelect 3.0 transmitters combined in this chain and correctly connected are found and recognised.
The free configuration software or a media control also permits controlling the entire QuickSelect system via the RS232 connection in all details.
The QuickSelect 3.0 is a multi-format switch for transmission of analogue and digital AV signals via a HDBaseT bus system in serial circuit Daisy Chain.
In expert mode, you can read the EDID information of the first connected output device with the button‚Auto EDID‘ andthus automatically file it in the Auto EDID memory of the QuickSelect 3.0.
Please connect your PC to the QuickSelect 3.0 System by RS232 for pin assignment for GUI, see p. 15.
QuickSelect is a dishwasher that provides a clear and intuitive UI by focusing on parameters that users understand best(time, energy and water consumption), making them aware of the environmental impact each setting has.
The QuickSelect uses AUTO EDID to read the resolutions that can be presented for the first playback device in the chain via the HDMI connection and saves them in all QuickSelects.
Connect deactivated QuickSelects with a cat-6 cable(AWG 23),connect link output of the first device to the link input of the next QuickSelect 3.0, proceed accordingly until all devices are connected in series.