Examples of using Radio code in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Illuminated The radio code is being sent.
Each transmitter button is assigned to a radio code.
DIP 1-2 Read in/cancellation radio codes for motor control.
Each hand transmitter button is assigned to a radio code.
Inheriting a radio code from the hand transmitter, see section 9.1.
The LED lights up red and the radio code is transmitted.
Flashes quickly The radio internal push button has learned the radio code.
DIP 2-1 Read in/cancellation radio codes for courtesy light control.
Each button/button combination has its own radio code.
If the radio code is recognised, the LED flashes quickly in blue.
Flashes quickly The hand transmitter has learned the radio code.
If the radio code is transmitted and recognised, 2 release the hand transmitter button.
Press the button of the hand transmitter whose radio code you want to transmit.
Indicates that a radio code that is not in the memory, has been received during normal functioning.
LED display9 Blue(BU)Condition Function Illuminated for 2 seconds A radio code is being.
If the radio code is recognised, the lED flashes quickly in blue. after 2 seconds, the lED goes out.
Press and hold the hand transmitter button whose radio code is to be inherited.
Illuminated for 2 seconds a radio code is being transmitted Flashes slowly Hand transmitter is in the learn.
Your swift response to our sample request has given him confidence to build a radio code clock using PIC programming techniques.
App The radio code of the integrated receiver(drive) was incorrectly or not inherited/ taught in.
Incredibly, the fully functional original factory Beta radio/cassette stereo remains fitted andstill rrtains its radio code instruction book.
We used them as the key to Dieter's radio code, when I was operating him in Austria from Zurich in 1943.
The radio code is transmitted when the device is in the teach in modus.- The LED of the gateway flashes in red and blue.
To be able to teach in the desired functions,the hand transmitter whose radio code is taught in on the device must be located near the gateway.
If no valid radio code is recognised within 20 seconds, a pop-up window appears indicating that teach-in of the desired channel has failed.
If the control unit correctly receives a radio code which is not, however, stored in the memory, it signals this condition with a flash of the“radio LED”.