Examples of using Reference clock in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Input for precision 10 MHz reference clock.
NTP needs a reference clock that defines the true time.
Special features usable in TwinCAT as a reference clock.
DRAM reference clock at 100 MHz and DRAM frequency on DDR3-800.
Input signal: 2.048 MHz reference clock, TTL level.
DRAM Reference Clock[Auto]* Sets the DRAM reference clock. .
It is therefore imperative that the reference clock is as accurate as possible.
At 45MHz faster than the reference clock of 1030MHz, you will be running faster, efficient and more reliable out of the box without you having to do anything at all.
When the start of the set time is announced(reference clock, radio, etc.), reset the crown Position 1.
At 50MHz faster than the reference clock of 860MHz, you will be running faster, efficient and more reliable out of the box without you having to do anything at all.
The REL1000 error relay outputis connected to the TTL TIME_SYNC output of the reference clock GPS, GLONASS.
Devices connected directly to a reference clock are commonly referred to as stratum 1 servers.
Its highly efficient jitter suppression refreshes and cleans up any clock signal,and provides it as reference clock at the two outputs.
The command‘server' specifies the reference clock, any characters after the‘' symbol are comments, example.
The reference clock is the device that sits atop the stratum hierarchy and is typically a cesium atomic clock or a Global Positioning System(GPS), which have atomic clocks built into them.
LINUX, UNIX, or Solaris drivers are provided as a NTP reference clock driver for the standard NTP distribution.
The distance from the reference clock is known as the stratum levels and they exist to prevent cycles in the NTP and confirm accuracy.
In the DRAM configuration menu you will find among others the selection, whether to the DDR4 reference clock 100 MHz or 133 MHz and how high you like to adjust the DDR4 RAM voltage.
NTP is reliant on a reference clock and all clocks on the NTP network are synchronised to that time.
The Crucial 10th Anniversary 2GB PC2-5300 CL3 kit(TY2KIT12864AA663) is better overclockable than the PC2-6400 CL4 pendant and they are thereby veryuseful for a very high FSB and/or reference clock.
The distance from the reference clock is known as the stratum levels and they exist to prevent cycles in the NTP.
Due to the highly efficient jitter reduction, any clock signal- even AES and word clock- can be improved and refreshed,and subsequently be used as reference clock at the word clock output.
A 10 MHz input for a reference clock replaces the signal of the internal OCXO, which also offers a very good stability of± 0.5 ppm.
Com(Microsoft) but it must be noted that internet time sources can not be authenticated which can leave a system open to abuseand Microsoft and others advise using an external hardware source as a reference clock such as a specialized network time server.
Even if the overclocking result with 310 MHz reference clock is very high, it stresses the processor unnecessarily by some missing overclocking options.
This AMD Socket 939 board has overclock options in barrels and the EPoX 9NPA+ SLI reach in the test in spite of theoriginal chipset voltage the highest HT reference clock of 330 MHz, so that also a processor with locked multiplier can reach unexpected clock frequency.
But Switzerland's reference clock, the FoCS-2 developed by the Swiss Federal Institute of Metrology(METAS), uses the oscillations of caesium atoms as a basis for measuring time.
With asynchronous clock setting,it was possible to reach a enormous high 330 MHz reference clock and with onboard GPU it was possible to overclock the reference clock up to 260 MHz.
Thanks to the nice overclocking options and the enormously high reference clock result up to 335 MHz, the ASRock M3A790GXH/128M motherboard(like the previous tested A790GXH/128M motherboard) got the Redaktion ocinside.
Furthermore worth mentioning in this contextis the high-precision"200 Femto Seconds VCXO reference clock", exclusively in the 300 series performs their work and where the so-called jitter- temporal inaccuracies in the conversion of the signal, affecting the sound- to a minimum reduced.