Examples of using Setpoint temperature in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Cooling capacity and setpoint temperature.
Setpoint Temperature Ramp back to SP Ramp back to PV.
Display of room temperature and setpoint temperature.
When the setpoint temperature of 15 C is attained, the heating will again be switched off automatically.
It has a very clear display indicating the setpoint temperature.
Lock: Locking of the setpoint temperature and temperature window.
The oven has 230 C max temperature, as well as a permanent derogation to the setpoint temperature of +/-3 C 75 c.
For heating or cooling:„1“: Setpoint temperature has not yet been reached.
The setpoint temperature can be modified directly via the screen or by a compatible domotic controller.
Switching time periods, operating mode, setpoint temperature and week day are displayed in normal mode.
Second setpoint temperature for night mode programmable requires only one switching contact of the time relay.
With temperature sensor, adjustable setpoint temperature and automatic temperature control.
The setpoint temperature can be changed at any time by using the buttons on the front of the Living Connect.
Co-speed factor: This parameter influences the time for reaching the setpoint temperature when working in external control mode.
The thermostat can receive the setpoint temperature through another Z-wave controller, and may also be used as a temperature sensor.
Front button to change the operational state(comfort/ standby) and increase/ decrease the setpoint temperature in several steps.
Display of room temperature, setpoint temperature and outdoor temperature, time and weekday etc. 12883.
Rotary controller to change the operational state(comfort/ standby) and increase/ decrease the setpoint temperature in several steps.
The control technology is so finely tuned that the setpoint temperature is guaranteed to be reached without temperature overshoots.
The generator power for induction heating is controlled via a thermocouple,which means that the setpoint temperature cannot be exceeded.
The display shows the actual temperature value(34), the setpoint temperature(31/35) and the fixed temperatures(28/29 or 37/38) of the connected tool.
These wireless temperature controllerprovide reliable both actual as well as setpoint temperature to a corresponding heating actuator for controlling of actuators.
Standard feed-through on the rear panel, battery-bufferedControlCOCKPIT(option), process runtime starts with SetpointWAIT function only when the setpoint temperature is reached, alarm messages can be sent via e-mail or SMS with MobileALERT(option) and much more.