Examples of using Stroke frequency in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Stroke frequency with optional acoustic signal.
This network connection enables you to control the stroke frequency and the number of strokes. .
The stroke frequency needs to be adjusted constantly.
The delivery performance can be controlled exactly by stroke frequency and a lock-type stroke adjustment.
Stroke frequency step less adjustment using button.
To adapt the dosing performance, the stroke frequency can be manually adjusted across the range from 0 to 100.
Stroke frequency also connectable with acoustic signal.
To adapt the dosing performance, the stroke frequency can be adjusted manually or via an external control contact.
Due to the good sliding properties of PTFE, this wiper is suitable for short stroke cylinders with high running speed andhigh stroke frequency.
In addition, the stroke frequency can be changed by pulse division or multiplication.
The oil well has a serious problem of sand stuffing, and the oil well cannot be shut downfor a long time to change the motor pulley and adjust the stroke frequency.
The stroke frequency can be reduced by means of a pressure-reduction valve connected on the line side.
It is possible to vary the type of work by rotating the adjustment screw clockwise(to decrease stroke frequency) or anticlockwise(increase) fig.4.
The stroke frequency is significantly lower when flying with lift than when in climb or hovering flight.
The Concept2"Model D" rowing machine features a display that shows the distance,speed, stroke frequency, calories burned, watts and heart rate optional.
The stroke frequency should be decreased gradually and which can't be carried out by manpower.
This system detects the vacuum and air lock condition at the end stage of steam injection by indicator diagram reading,and decrease the stroke frequency properly, which increases pump efficiency and saves energy.
Transfer solutions: High stroke frequency(SPM) compensates off-center loads and offers full synchronization.
When the polished rod is in down stroke, the control system ensures the maximum speed of polished rod under the condition that the polished rod is not float, pumpis not locked, and the motor and reducer are not overload, which makes the stroke frequency match the well work conditions, and increase oil production.
From the stroke frequency of the processor can be calculated to which number it should count in order to get a certain time delay.
For high stroke frequencies and pulley applications.
DiloMachines builds needlelooms for all types of needling, with all needle densities and stroke frequencies up to a maximum of 3000 strokes/minute.
Frequency, stroke, test load, test temperature and test duration are pre-set.
The mechanical oscillation system willbe replaced by a hydraulic one, allowing the stroke and frequency to be varied during casting.