Examples of using Switch must in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The switch must be set to position 0.
When you press the TEST key, the switch must disconnect.
The switch must be in the 0 position.
In this case, theTone/Pulse switch must be moved to Pulse.
The switch must close its contacts by activating.
In order to re-establish functionality of that service, the switch must be rebooted.
The switch must be in the 0 position.
Otherwise the switch must further cool down.
The switch must be at the OFF position, i.e. the«0» is visible.
At all the other units, the switch must remain in the upper position.
The switch must be held until the window is opened or closed.
The SELECTOR switch must be adjusted.
The switch must be toggled such that the intermediate position is'skipped', as it were.
O Test button: the switch must break the circuit machine switches off.
The switch must be kept in this position for the desired interval.
The plug or omnipolar switch must be easily reached on the installed equipment.
This switch must ensure that all AC consumers can be switched off at once.
The role switch must be set to WIRELESS.
This switch must be able to withstand the maximum load of the appliance and must conform to all current safety regulations the earth wire should not be interrupted by the switch. .
An isolation switch must be installed before dimmer in the fixed wiring.
This switch must be installed in the building's permanent electrical system, in the immediate vicinity of the equipment.
In 2018, the switch must be made from monitoring to reputation management.
This switch must be arranged properly, easily accessible for the user and marked as the isolation device for this instrument.
The TWIN SUB- Switch must be set in this configuration to"OFF"- Position.
This switch must always be set to the correct position before you connect your receiver to the USB port of your PlayStation 3 or PC.
However, the switch must not in practice lead to an extension of the time limits.
This switch must be sufficient for the load and must comply to regulations in force the earthing wire must not be interrupted by the switch. .
The INPUT MODE- Switch must be set in this conguration to"2CH"-Position.
Note: This switch must be in the‘ON'( I) position for the Fire to operate with or without heat when activated.