Examples of using Switching delay in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Adjustable On and Off switching delay.
Switching delay: approximately 6 seconds.
Adjustable under-voltage, hysteresis and switching delay.
Switching delay adjustable from 10ms- 60 Sec.
Precise adjustment of switching thresholds and switching delays.
Its switching delay can be set between 0.1 and 20 s.
Number, function 1 x switching relay(spdt) Switching delay 0.2….
Switching delay 0.3, 1, 3, 10, 30 sec dry to wet/ wet to dry.
With switches 4, 5 and 6 you can adjust the switching delay.
Switching delay Off: 4 seconds up to 90 seconds,< 12,3 V always 4 seconds.
The change of switchpoints for frequency, hysteresis or of switching delay 10ms- 60sec.
This provides a defined switching delay that works more efficiently than sensing air temperature.
Both sensors have different switching functions such as switching point,adjustable hysteresis, switching delay, or window function.
Any switching delays, inaccurate switching operations up to the failure of entire gears are eliminated.
The switch on delay is activated(switch 3) and the switching delay is set to 8 seconds switch 4, 5 and 6.
Switching delay: Here you can define the delay until the first accessory is switched after having activated a route.
The switching threshold as well as a switching hysteresis and a switching delay can be freely programmed by the user for each output.
Via this interface, the user can set range, sensitivity,light-on/ dark-on mode, switching delay or deactivation of the operating elements.
Desktop& switch delay.
If both solar circuits switch off the burner requirement is released again with a switch delay of 5 minutes.
If the solar circuit switch off the burner requirement is released again with a switch delay of 5 minutes.
Delay between switching on the run current and the start of the motor.
Delay between switching on the run current and the start of the motor 2055_StopCurrDelay.