Examples of using Z-wave controller in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Turn your Raspberry into a Z-Wave controller.
Your Z-Wave controller will handle everything else.
Compatible with any Z-Wave or Z-Wave+ Controller.
A Z-Wave controller(remote control, dongle, and so on) is required to use this module.
The temperature instruction can be sent via the Z-Wave controller.
Openzwave: API to use a Z-Wave controller, 78 days in preparation.
The change request is sent directly to the Z-Wave controller.
Z-Wave(option): Use built-in Z-Wave controller to build your Smart Home based on Z-Wave technology.
Current battery level can be read out by a Z-Wave controller.
The Scene Master is a Z-Wave controller which can trigger actions and predefined scenes in a Z-Wave control center.
The instantaneous and total consumption values are sent to the Z-Wave controller.
Strips is fully compatible with the Z-Wave controllers offered by ZIPATO and Fibaro.
The Quad WallMote switch from Aeotec isa portable, wall-mounted, smart Z-Wave controller.
As secondary controller it sends commands to the Z-Wave controller and also controlls by that defined devices and scenes.
It can be used be used either manually, like any ordinary cord switch, or remotely via Z-Wave controller.
A Z-Wave controller(remote control, dongle…) is necessary to integrate this detector to your network, if you already have an existing network.
It can be controlled by a remote control, PC software or any Z-Wave controller in your network.
All you have to do is connect the Strips to a Z-Wave controller, and then use the adhesive mount to attach the magnet to the door or window and the sensor to the frame.
This switched outlet can be controlled by remote control, PC software or any Z-Wave controller in your network.
The HUB works with‘Z-Way', the fist Z-Wave Plus certified Z-Wave controller software, which also connects devices with different technologies with each other.
Thanks to the energy management andthe internal capacitor the wind sensor sends measures to the Z-Wave Controller even during the night.
Truly connected, the LED bulb is directly controllable via your Z-Wave controller, whether remote or a home automation box, or even via other Z-Wave accessories.
This Key Fob Remote Control can be set up as the primary controller of a Z-Wave network oras an additional Z-Wave controller.
The device complements the existing electric strike, communicates with the Z-Wave controller and allows the door to be opened remotely.
In fact, removing the main block from its position will immediatelyset off the siren and send an alert of attempted sabotage to the Z-Wave Controller.
The sensor can also be used in combination with a Z-Wave controller for home automation, by detecting both a presence or the opening of a door/window and changes in light levels.
Changes in the device status result in automatic signal to Z-Wave controller and associated devices.
But, like any really smart light bulb your Z-Wave controller or home automation box will be able to control both the shade and the colour of the light produced by the LED bulb to perfectly suit the time of day and the atmosphere of your room.
It is equipped with two hot swap 3.5” SATA HDD racks each supporting up to 10TB+ HDD, three USB ports, SD card slot, 1Gbit Ethernet, 802.11ac Dual Band 2T2R Wi-Fi, built-in DVB-T/T2/C tuner(for non-US version),built-in Z-Wave controller.
The only device suited for use with all types of Z-Wave controller, and capable of implementing an active energy-saving management policy defined by the user according to his energy consumption, or to the amount of energy produced by his solar power system.