Examples of using Z-wave controller in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Data is sent to the main Z-Wave controller.
A Z-Wave controller is required to control the remote switch.
Temperature alarms reported to the Z-Wave controller.
Using functionality of a Z-Wave controller(see the controller's manual).
Sending an appropriate alarm command to the Z-Wave controller.
It is necessary to have a Z-Wave controller to work properly. 79,99€.
Successful removing will be confirmed by the Z-Wave controller.
To use Z-Wave functionality,«Z-Wave Controller» application should be installed.
Place the device within the direct range of your Z-Wave controller.
Z-Wave(option): Use built-in Z-Wave controller to build your Smart Home based on Z-Wave technology.
Compatible with any Z-Wave or Z-Wave+ Controller.
Place the Smoke Sensor within the direct range of your Z-Wave controller.
In fact it does not need to be added to any Z-Wave controller at all.
Insert the device into a socket within the direct range of your Z-Wave controller.
Successful adding will be confirmed by the Z-Wave controller's message.
Place the Swipe within the direct range of your Z-Wave controller.
Successful removing will be confirmed by the Z-Wave controller's message.
Place the RGBW Controller within the direct range of your Z-Wave controller.
Successful adding will be confirmed by the Z-Wave controller. Back To Top.
To make Z-Wave range test possible,the device must be added to the Z-Wave controller.
The current battery level is displayed in a Z-Wave controller interface.
Insert the device into a socket within the direct range of your Z-Wave controller.
Place the RGBW Controller within the direct range of your Z-Wave controller.
The association of further Z-Wave devices needs to be done by a Z-Wave controller.

