Examples of using Negative terminal in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
Disconnect the negative terminal of the battery!
Ground is normally connected to the negative terminal.
Disconnect the negative terminal of the battery before installation.
Disconnect first the black cable from the negative terminal.
Disconnect the battery's negative terminal from the motorcycle.
You get red for positive and black for the negative terminal.
Disconnect the battery s negative terminal before wiring and mounting.
The capacitor is soldered to the positive and negative terminals.
For this, as in the previous case,we remove the negative terminal with the battery(if it has not been removed before).
Note that the positive battery terminal is always larger than the negative terminal.
Do not connect the positive and negative terminals of the battery.
Attach the positive cable to the positive terminal andthe negative cable to the negative terminal.
Start dismantling it is necessary from the negative terminal, and mount- with the plus.
The polarity of the voltage across them is determined by conventional current flow from the positive to the negative terminal.
Today, over 99% of automotive and LTV applications,use the negative terminal of the battery as the ground.
They are typically loaded into the hearing aid via a rotating battery door, with the flat side(case) as the positive terminal(cathode) andthe rounded side as the negative terminal(anode).
Connect one end of the black jump lead to the negative terminal on the battery you are jump starting from.
Electricity flows from the battery as soon as there is a circuit between the positive and negative terminals.
But the two could effectively be acting as positive and negative terminals… with the ocean itself being a kind of giant battery.
When there's a voltage difference between each end of the metal the electrons are attracted to the positive terminal and move in that direction,allowing the battery to feed in more electrons through the negative terminal.
The polarity of the device(positive and negative terminals) will help.
Short each battery across all the positive and negative terminals with a total external resistance not greater than 50 milliohms.
Safety precautions Do not short-circuit the positive and the negative terminals of the plug.
Requirement: Short-circuiting of the positive and negative terminals of the cell at ambient temperature shall not cause fire or explosion.
The terminals of these cables are connected with the positive and negative terminals of the battery.
Connect the woven copper shield to the battery's negative terminal and the core to the battery's positive terminal(figure 9).
As H& 0 separate, H is drawn to the positive and 0 to the negative terminal of the electrolyzer.
The ACB uses a 50-micrometer-thick nickel foil with one end attached to the negative terminal and the other extending outside the cell to create a third terminal. .
Open the hood anddisconnect the wire from the negative terminal of the battery.
Today over 99% of automotive and LTV(Limited Terrain Vehicles)applications use the negative terminal of the battery as the ground.