Examples of using Solid-phase in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
Solid-phase granules with diameter greater than 0.005 mm and with the concentration.
By the application of power ultrasound, the solid-phase extraction can be carried out more efficient, economic, and environmetal-friendly.
Solid-phase peptide synthesis(SPPS) is the most common method of peptide synthesis today.
It is applicable to the separating of suspension liquid containing the solid-phase material with the granule size greater than 0.1 mm and concentration being 25!
Solid-phase granules with diameter greater than 0.005 mm and with the concentration being 2~40%.
The decanter centrifuge is applicable to the separating of suspension containing solid-phase granules with diameter greater than 0.005 mm and with the concentration being 2~40%.
However, solid-phase peptide synthesis is the most frequent process of peptide synthesis today.
Under the action of the centrifugal force field, the liquid phase passes through the filtrating medium andis discharging out of the machine, while the solid-phase material is retained inside the drum and forms the filter residue.
The pad employs a solid-phase chemistry which uses a highly specific enzyme reaction.
Under the action of the centrifugal force field, the liquid-phase passes through the filter medium andthe discharged out of the machine, while the solid-phase material is retained inside the drum and after the machine is stopped, the material is discharged from the top.
Of the machine, while the solid-phase material is retained inside the drum and, after the machine is stopped, the material is discharged from the top.
Under the action of the centrifugal force field, the liquid-phase passes through the filter medium andthe discharged out of the machine, while the solid-phase material is retained inside the drum and after the machine is stopped, the material is discharged from the top.
The solid-phase residue is continuously pushed by the spiral feeder to the conic end of the drum and, after dehydration in the drying area, is discharged out of the machine.
The present invention reduces the rate of temperature increase in the solid-phase sintering stage can obtain a high sintered density and almost completely eliminate the copper overflow.
More specifically, the resin also known as“Barlos Resin”, is considered the most important development internationally in thefield of resins and was characterized as groundbreaking in the advancement of solid-phase synthesis of drugs and an extremely efficient tool in the discovery of new drugs.
It is applicable to the separating of suspension liquid containing the solid-phase material with the granule size greater than 0.1 mm and concentration being 25- 75% or the separating of short fibers.
The material is fed into the drum at the top; under the action of the centrifugal force field., the liquid-phase passes through the filter medium andthe discharged out of the machine, while the solid-phase material is retained inside the drum and, after the machine is stopped, the material is discharged from the top.
And significantly grow the grain size after the solid-phase sintering, with other conventional After sintering method similar size, microstructure and other liquid-phase sintering is also similar;
The drum and the spiral feeder rotate in the same direction but with a certain speed difference; the material is led into the feeding spiral inner cylinder via the feeding pipe and, after speeding up, enters the drum; under the action of the centrifugal force field,the relatively heavier solid-phase material deposits on the drum wall forming the residue layer; the solid-phase residue is continuous feeding, separating, dehydrating and discharging under full-speed running.
Test Principle: Troponin I Test employs solid-phase chromatographic immunoassay technology to qualitatively detect the presence of cTnI above an established cutoff level in human blood, serum and plasma samples.
In general, the rate andextent of biodegradation are greater in a bioreactor system than in situ or in solid-phase systems because the contained environment is more manageable and hence more controllable and predictable.
Goal of the solid-liquid extraction or solid-phase extraction(SPE) is it to separate analytes, which are dissolved or suspended in a liquid mixture, and to isolate them from a matrix according to their physical and chemical properties.
For example, MIP technology is used as solid-phase micro-extraction technique to operate and purify cannabis-derived molecules such as CBD or THC from the full spectrum extract in order to obtain cannabinoid isolates and distillates.
Under the action of the centrifugal force field,the relatively heavier solid-phase material deposits on the drum wall forming the residue layer; the solid-phase residue is continuously pushed by the spiral feeder to the conic end of the drum and, after dehydration in the drying area, is discharged out of the machine.