Examples of using Analog signal in English and their translations into Hebrew
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
After the analog signal is not.
Two VHF transmitters were used to transmit the analog signal.
The term analog signal refers usually to electrical signals. .
I need your access codes for the antennas to send an analog signal.
A time-versus-voltage graph of an analog signal should be smooth and continuous.
Currently the television channels use this frequency to transmit analog signal;
The analog signals are sent continuously even if there is no new info to send out.
As well as the previous version,it is not used to transmit an analog signal.
The analog signals are transmitted continuously even if there is no new information to send.
It works by encoding the picture and sound information as an analog signal.
Digital signal processing and analog signal processing are subfields of signal processing.
DVI-A is a rather rarevariant that is designed to transmit only an analog signal.
The DVR receives an analog signal transmission, which the DVR then digitizes itself.
RCA andComponent are two types of cables that are used in analog signal transmission.
Analog signals can use voltage or current with a magnitude proportional to the value of the process signal. .
Pressure, temperature, flow, and weight are often represented by analog signals.
DVI-D Single link- this output does not transmit an analog signal, and there is no sense in buying an adapter for it- nothing will work.
Their resistance to noiserepresents a key advantage of digital signals over analog signals.
In 2018 expected shutdown of the analog signal of the federal television channels in cities with populations of less than 100 thousands of people.
Public broadcasting channel(First) as a social broadcaster forsome time will continue to distribute the analog signal, while privateers alarm goes off.
Analog signal processing is for signals that have not been digitized, as in legacy radio, telephone, radar, and television systems.
Those include not only normal network transmissions,but also analog signals- such as power consumption- that can indicate the presence of a covert piece of hardware.
An analog signal varies continuously according to the information carried, and a digital signal varies according to a series of discrete values that represent the information.
A comparator consists of a specialized high-gain differential amplifier.They are commonly used in devices that measure and digitize analog signals, such as analog-to-digital converters(ADCs), as well as relaxation oscillators.
It is cheap too but the problem with analog signals is that there is a limitation on the size of the data that can be transmitted at any given point of time.
Most LCD manufacturers do make note of the panel's native resolution as working in a non-native resolution on LCDs will result in a poorer image, due to dropping of pixels to make the image fit(when using DVI)or insufficient sampling of the analog signal(when using VGA connector).
For analog signals, signal processing may involve the amplification and filtering of audio signals for audio equipment or the modulation and demodulation of signals for telecommunications.
In telecommunication, as compared to analog signals since digital signals have an original blueprint that has to be replicated at the conclusion point of the transmission, it is more accurate and clear.