Examples of using Polystyrene in English and their translations into Hebrew
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Polystyrene ceiling tiles.
So the victim's shoes and clothes have polyethylene and polystyrene particulates on them.
Just, Polystyrene, they fooled us, the king is not wearing anything.
It's a highly flammablesolvent used by architects when building polystyrene models.
Polystyrene is an inexpensive, lightweight plastic with a wide variety of uses.
Modern napalm is composed primarily of benzene and polystyrene, and is known as napalm-B.
Spray for expanded polystyrene- also does not harm the structure and integrity of the material;
If the crack is deeper than 1,insert a filler such as polystyrene or backing sponge.
Polystyrene balls- this type of filler is similar to crushed foam in the form of small balls.
Dr. Brennan wants me to identify the best solvent… to remove polystyrene from- on the bones.
This device slowly fills each polystyrene cup up… with kerosene, propylene, turpentine… hydrochloric acid and-.
To this end, Bell Biker Company first developed a CPSC standard bicycle helmet, it is made of ABS plastic shell,wrapped in polystyrene foam.
Dr. Hodgins says it's most likely polystyrene ceiling insulation… that melted in the fire and coated the body.
With ultrasound close to 40 kHz, similar to those that only bats can hear,the researchers held a two-centimeter polystyrene sphere on the tractor beam.
(2010) have prepared composites of polystyrene and nanodiamonds, containing nanodiamonds in a range between 0 and 25% weight.
Working with ultrasonic waves at a pitch of 40kHz, a similar pitch to that which only bats can hear,the researchers held a two-centimetre polystyrene sphere in the tractor beam.
The polystyrene ball on a pivot from last week has been developed into a black stand with a lighted ball positioned on its upper diagonal surface.
Orgon's Venetian blinds are made of aluminum,wood or foamed polystyrene, according to the customer's needs and/or production options.
At room temperature, polystyrene is normally a solid thermoplastic, but can be melted at higher temperature for molding or extrusion, then resolidified.
As a first demonstration of their colloid printing technique,the team worked with solutions of polystyrene particles in water, and created centimeter-high towers and helices.
Syndiotactic polystyrene with the structure produced using metallocene catalysts, polystyrene in the development of new varieties, properties, belonging to engineering plastics.
In his years at Farben,Mark worked on the first serious attempts at the commercialization of polystyrene, polyvinyl chloride, polyvinyl alcohol, and the first synthetic rubbers.
Polystyrene(PS) Shrinkage film strength is low, do not withstand impact, it is rarely used, and polyvinyl chloride(PVC) is not conducive to recycling treatment, not in line with environmental requirements.
For example, nanodiamonds(average size of about 4nm) and polystyrene can be dispersed in cyclohexane to obtain a special composite. In their study, Chipara et al.
At the Pyrenees site, however, most of the plastic bits were smaller than 25 microns andconsisted mostly of polystyrene and polyethylene fragments, common in many packing materials.
Baekeland's work lead to the development of polystyrene in 1929, polyester in 1930, polyvinylchloride(PVC) and polythene in 1933, and nylon in 1935.
Electrolyte solutions can also result from the dissolution of some biological(e.g., DNA, polypeptides)and synthetic polymers(e.g., polystyrene sulfonate), termed polyelectrolytes, which contain charged functional groups.
The research into different materials led her to the understanding that polystyrene pellets swell like popcorn when boiled, and to the possibility of creating a series of objects in a home manufacturing plant.
It's made from a combination of Depron foam and balsa wood,with the wings held on by polystyrene joiners- in the event of a crash, those joiners allow the wings to come off instead of breaking.
In subsequent trials,they tested solutions containing different sizes of polystyrene particles and were able to print towers that reflected specific colors, depending on the individual particles' size.