Examples of using Set temperature in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
It can reach the set temperature in short time after being charged with electricity.
Meanwhile, it can heat the solvent so that it can be fully mixed at set temperature.
The set temperature is maintained with fluctuations of 1-2 degrees in one direction or another.
When leading the hand to the zone of the sensor,the water flow is switched on with the previously set temperature.
Moreover, when the set temperature is reached, it will cut off the electricity automatically.
It is 120w and have temperature control function,when the temp reach the set temperature, it will stop heating.
At a set temperature of 24 degrees, perspiration normalizes, which leads to stabilization and restoration of the skin.
A thermostat, when set to"cool", will only turn on when theambient temperature of the surrounding room is above the set temperature.
Machine set temperature of 180 degrees Celsius(365 degrees Fahrenheit), the paper time is 80-100 seconds, 40-60 seconds of Sublimation Paper;
This feature isvery convenient when you want to change the set temperature to suit a particular workpiece, component, or tip shape.
If steam or excessively hot water shoots out of faucets, or you hear boiling sounds inside the water heater,the appliance may not be shutting off at its set temperature.
This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life.
I'm not a refrigerator, but I know that in a household refrigerating unit,the compressor makes cyclical starts/ stops to reach and then keep the set temperature.
Specifically, these types of setups make it so if you were to adjust the set temperature up to 80 degrees F or so, when the actual ambient temperature is 70, it may decide to adjust the temperature up 1 or 2 degrees to accommodate the extreme call for extra heat in your location, but not up to 80 degrees.
It is turned on at full power once, cools the refrigerator's chamber to the desired temperature, and then simply maintains the set temperature by reducing the engine speed.
Unfortunately, it is possible for the thermostat itself to reach the set room temperature, causingit to shut off even before the heater has brought the entire room to the set temperature.
Chocolate melting machine 1 Temperature error correction F1 When the display temperature and actual temperature are different this parameter can be corrected to make the two identical F1 actual temperature display temperature 2 When thetemperature sensor meets Measuring temperature set temperature return difference….
With temperature compensation function, the water setting temperature adjusts automatically as the house's heat loss changes.
With temperature compensation function, the water setting temperature adjusts automatically as the house's heat loss changes.
The timer start working when the practical temperature(PV) equals the setting temperature(SV) and the machine power supply would be cut off when the preset time is reached along with alarming.
The thermostat designed for fan coil unitor wind pipe system of central Air condition helps to adjust the indoor temperature by comparing the room temperature with the setting Temperature The thermostat applied to water system or wind system two pipes or four pipes of aircondition control fan coil motorized valve….
The temperature of the furnace is measured by the thermocouple and the setting temperature of the PLC(or temperature control meter) is compared with the PID operation of the temperature control meter(or PLC), and the corresponding pulse signal is output to control the air valve of each burner.
Set the temperature to 190 degrees, dry the product for 4 minutes.
Set the temperature at 80F or higher- virtually all equipment manufacturers allow this.
You can easily set the temperature to whatever degree you prefer.
Select the direction of the curl, set the temperature and time.
Set the temperature to 65 degrees, turn on the fan to the maximum.
Easy to operate: turn on the power, set the temperature and processing time.
In them, you can set the temperature regimes depending on the date and time.
Each segment can also set the temperature, humidity and time, re-run 999 times.