Examples of using Set temperature in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Ambient set temperature(℃).
Set temperature 140℃ for 24 hours testing.
Returns to the previously set temperature.
Mode, set temperature, wind speed and the running time.
Returns to the previously set temperature.
Moreover, the set temperature will not change until the next setting point.
Heat indicating light turns off once set temperature is reached.
The set temperature must be reached within minutes after the start 30 obrabotki.5.
When the actual temperature reaches the set temperature and stabilized.
Limit of the set temperature, the compressor and air cooled will start to work automatically.
Knob to adjust the temperature dial indicates the set temperature.
While chiller and bath reach their set temperature, the vacuum is dynamically adjusted.
Platform 2 relies on its product design to control the heating of tobacco within a set temperature range.
Set temperature. Baking time 30-35 minutes, basic meet the requirements of white rice. Due to peanut/and.
When it begins to work,the air conditioner will heat the water to the set temperature in a very short time.
Generally, a fan coil reaches the set temperature within one hour after power-on, and then runs at a low or medium speed.
Since the volume of the B-301 is 2.5 times smaller, the bath reaches the set temperature within a very short period of time.
Set temperature to X degrees"- sets the desired temperatureThe function may vary depending on options/climate control.
When the temperature inside the transformer cubicle is higher than the set temperature, the fan installed on the top will start to work and control the temperature. .
The soldering iron is turned on by the toggle switch on the right,the handlethe required temperature is set, when the set temperature is reached, the red LED starts flashing.
The IOT-function of the option selected, user can confirm data such as, the set temperature, heating temperature, operation time, operation number of times, heater exchange number of times.
The temperature regulation range of the temperature controller of the tank is 30~75°C, and the set temperature at 65°C before dispatched from the factory.
Wide screen touch structure of industrial level, rich display information, including the set temperature, sample temperature, oxygen flow rate, Nitrogen flow, differential thermal signals, all kinds of switch state, flow goes to zero.
The plates have an efficient check PLUM system to control and monitor the temperature onthe digital display and allow you to maintain and ensure the set temperature always at work, always guaranteeing the best performance of the plate.
Due to a low temperature control precision(±2°C), traditional fan coils usually require a set temperature of 20°C-22°C to prevent unpredictable temperature changes in hot summer.
Especially, it is affected by various factors including kindsof resin,cooling temperature of mold, set temperature of hot runner, gate dimension, and state of tip, for which lots of empirical know-how is necessary.
Version A: Led indicator(Five heat setting temperature version).
Deluxe test lead sets, temperature probes, current shunts, high voltage probes….
Check the setting temperature if it is too low, or maybe the specification of the water heater you choose can't meet your need.
Therefore, the setting temperature is controlled at 180° C., the vehicle speed is 30 m/min, and the tension is properly controlled.