Examples of using Commmanager in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
CommManager or PC computer eHouse system management.
VOLT%- Status of analog inputs for CommManager(voltage value).
CommManager is the name of the controller(not amended in the application).
Home Automation eHouse decoding CommManager status- source code|.
(TCP/IP, CommManager or eHouse server PC application- to send commands).
It only refers for Ethernet eHouse or eHouse 1 under CommManager supervision systems.
Connectors- CommManager and LevelManager and other large Ethernet eHouse system controllers.
Domum Automation producentis eHouse est imperium per SMS,Ethernet immediate a CommManager.
This means that,that the panel is not connecting to the server TCP CommManager, but listening to the messages broadcast from CM.
Switches installed on the demo unit is“normally open” NO that is compliant with ERM,LM and not CommManager.
To use the switches on the module connected to CommManager demo or LevelManager need to make an adapter connector(IDC14 to IDC50).
Connectors of large eHouse building automation Ethernet controllers- CommManager, LevelManager eHouse.
Status commmanager- integrated with the status of drivers eHouse 1(hybrid system) eHouse 1 under the supervision of CommManager.
In this way no matter how many recipients panels of status,it does not change the network load or CommManager CPU utilization.
Directories: 000,254 catalogs and CommManager contain information about the status of the alarm controller- blinds, marquess, gates.
To provide controllers status by default UDPport 6789 to the status of a binary(eHouse application or commmanager) and 6788 for the text of the application status(eHouse. exe).
CommManager works as a TCP/IP server responds to queries about the status panel, referring further connect the panels and maintain them until disconnected for any reason.
In addition to the datareceived from the controller eHouse 1(working on RS485), CommManager attach its current status, which is the state of the alarm system.
CommManager Ethernet Home Automation- Roller, Gateway Controller is the successor to the combined controllers ExternalManager- Roller, Gateway- Controller and 2* Alarm- InputExtender.
This use, however, is good for the systemrunning completely in the standard eHouse 1(no CommManager) because it gives you the opportunity to work with panels receiving data from the eHouse.
In this version, CommManager receives incoming statuses via RS-485(from eHouse1 controllers) and transmits the status without any changes on the two methods do not collide with each other.
This mode is required to work under the supervision of CommManager driver and sends the message destination address outside events, Own address to the destination device can tell the sender to receive events(hand- shake).
CommManager is controller of eHouse Home Automation system, which gather communication functions and is the“gateway to the world” for system based on system controllers eHouse version 1(485).
Direct connection to TCP/IP Server(PC or CommManager) locally on LAN, WiFi or via the Internet with any physical connection(DDNS is required in the absence of a fixed IP address and a lack of blocking and firewall for TCP/IP protocol).
CommManager controller can send status(eHouse 1 and CommManager in an integrated package), the UDP LAN and access to this data is connectionless and non-invasive as well as directly from CommManager or other Ethernet Ehouse controllers.
Instead of ExternalManager CommManager can be used, which has much greater functionality and larger number of sensor inputs, measuring inputs, outputs, implemented security system and has built-in GSM/ SMS and ethernet modules for communication.