Examples of using Ground loop in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
How to make ground loops.
The ground loop is ready. Categories.
Helpful Hints How to make ground loops.
Typically, the ground loop is made from improvised materials.
The next step is to measure the ground loop.
Then mounted ground loops connected by welding with the conductor.
Tip: The best time to install a ground loop is summer.
Then draw a ground loop circuit according to the type of materials used.
The optimal distance between the house and the ground loop is 5 m.
It is possible to make a ground loop along the perimeter of the building.
To check the quality of the ground using the ground loop res….
Consider the case of ground loop arrangement in the form of a triangle.
It is with this we take a look at this article, but also with how to mount a ground loop.
Avoid ground loops as there is no LF-shield connection to ground. .
Ask the ordinary electricians as settling ground loop in this particular region.
Before installing the ground loop, always consult a qualified electrician who lives in the same area.
A similar expert from experience knows how to make a ground loop ideally suited to the area.
If, however, when measuring the ground loop, it turns out that the resistance exceeds the standard value- add one more electrode.
If the measurement result corresponds to the optimum resistance value, the ground loop is mounted correctly.
For the arrangement of the ground loop you need to dig a trench to a depth of soil freezing.
Experts also strongly recommend tohow to make a ground loop, make all the necessary calculations.
It is better to invite employees of energy management thatthey took measurements and filled the ground loop passport.
Therefore, it is imperative to equip a ground loop for the entire house, thereby having secured yourself and equipment from short-circuiting.
AQ's patented technology vastly reduces ground-borne noise without compromising safety orcreating low-level ground loops.
Calculation of ground loop It is based on measurements of the specificsoil resistance, a characteristic which determines the level of electrical conductivity of the earth.
At this point, we check the loop resistanceOhmmeter ground.
UT270 series clamp earth resistance tester is widely used in electric power, telecommunications, meteorology, oil field,construction and industrial electrical equipment, such as the ground resistance measurement, loop resistance measurement.