Examples of using Bit error in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
Bit Error Ratio BER.
Improved SNR reduces the bit error rate.
Please allow a bit error due to manual measurement.
PI: Probability that a frame arrives with no bit errors.
Fiber Bit Error Rates(BER) are typically 10E-13.
This is usually reported as bit error ratio(BER).
The bit error probability pe is the expectation value of the BER.
The most commonly encountered ratio is the bit error ratio(BER).
The bit error rate(BER) is a ratio of bad bits to total bits. .
The BER can be considered as an approximate estimate of the bit error probability.
Measuring the bit error ratio helps people choose the appropriate forward error correction codes.
Pseudo-random code test function,easy to open circuit that can be used as a bit error meter;
Gives you a bit error plot an SLI compatible if bar error phone line and modem"B".
A bit error rate of 10^6 means that there is an average of one error per million bits. .
For example, a specified bit rate, delay, jitter,packet dropping probability and/or bit error rate may be specified.
Bit error, coding error, frame error, CRC error and E-bit error testing.
For example, a pre-defined bit rate, delay, jitter,packet dropping probability and/or bit error rate may be guaranteed.
It is especially useful when comparing the bit error rate(BER) performance of different digital modulation schemes without taking bandwidth into account.
For instance, a required bit price, delay, jitter,packet dropping chance and/or bit error charge could also be guaranteed.
A defined object for ISDN connections is that the bit error rate on a 64-kbps channel should be less than lo4 on at east 90% of observed 1-minute intervals.
For example, a required bit rate, delay, jitter,packet dropping probability and/or bit error rate may be guaranteed.
BERT or bit error rate test is a testing method for digital communication circuits that uses predetermined stress patterns consisting of a sequence of logical ones and zeros generated by a test pattern generator.
It also offers broadcast and multicast support, along with a further enhanced bit error rate performance, making it the best Bluetooth has ever seen.
High QoS is often confused with a high level of performance or achieved service quality, for example high bit rate,low latency and low bit error probability.
MIMO exploits phenomena such as multipath propagation to increase throughput,or reduce bit error rates, rather than attempting to eliminate the effects of multipath.
In non-CDMA 2G digital systems the criteria for requesting hard handover may bebased on estimates of the received signal power, bit error rate(BER) and block error/erasure rate(BLER), received quality of speech(RxQual), distance between the phone and the BTS(estimated from the radio signal propagation delay) and others.
Most telecommunication systems use a fixed channelcode designed to tolerate the expected worst-case bit error rate, and then fail to work at all if the bit error rate is ever worse.
In a bursty traffic environment like mobile telephony,the advantage afforded by asynchronous CDMA is that the performance(bit error rate) is allowed to fluctuate randomly, with an average value determined by the number of users times the percentage of utilization.