Examples of using Loadlink in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
Loadlink plus specifications.
BlueLink bluetooth 6.5T loadlink, use with HHP App for iOS and Android.
Loadlink plus additional technical data.
As a result a loadshackle typically uses around 1/3 the headroom of a loadlink.
Loadlink Plus Tension load cell with digital display.
In other applications headroom is limited so a load shacklesolution will be required rather than a loadlink.
The Loadlink plus is designed to be rigged with Crosby standard shackles.
For weighing andmeasurement applications that require the highest accuracy we always recommend a Loadlink or Radiolink.
Cabled tension loadlink for use with an SP Handheld controller(Wirelink plus).
Often, a set of shackles from manufacturers such as Crosby orGN Rope will be used to rig our loadlink or dynamometer-style load cells.
Cabled tension loadlink for use with an SP Handheld controller(Wirelink plus).
Decades of development into this product include many stand out features such as our unique strain gauging method that helpscompensate for wire rope torque when the Loadlink is loaded.
Cabled tension loadlink(digital dynamometer) with integral display(Loadlink plus).
Straightpoint 55T Load Cell Test Machine developed to assist our global network of Straightpoint partners this test machine has beendesigned to allow local calibration of our range of Loadlink, shackle and crane weigher products up to 55T capacity.
A loadlink consists of a top and bottom shackle in addition to the height of the loadlink body itself.
At Straightpoint we use the terms‘loadlink',‘dynamometer' and even'load indicating device'(LID) interchangeably.
Loadlink- a block of material with a loading hole for a shackle at each end allowing tensile forces to be applied.
The advanced microprocessor based electronics provide the Loadlink plus with high speed read rates, extreme resistance to industrial level noise and unprecedented stability.
A loadlink(+/- 0.3% of applied load) is around 3 times as accurate as a loadshackle(+/- 1% of applied load).
Mullard says,“It's important that service hoists are regularly tested and inspected in line with LOLER[Lifting Operations andLifting Equipment Regulations 1998]. Users might opt for a Radiolink or a Loadlink plus to execute a test, verify that the hoist is performing as it should be, and capture the data. A 1t to 2.5t capacity load cell would commonly be utilised for such work.”.
This can be done using a loadlink or loadshackle used in conjunction with our datalogging software for reporting.
The Loadlink plus features full function push button controls for tare, choice of units(lbs, kg, kN, and tonnes), peak hold, preset tare, audible set-point alarm and an overload counter.
Users might opt for a Radiolink or a Loadlink plus to execute a test, verify that the hoist is performing as it should be, and capture the data.
Loadlink plus is designed to be rigged with Crosby standard shackles- digital dynamometer tension load cell known worldwide as the original electronic force measurement device to feature an integral display, the Loadlink plus has been in production since 1979.
For 40 years Straightpoint has manufactured and supplied cabled andwireless telemetry loadlink, load shackles, load cells, digital dynamometers, compression loadcells, crane scales, running line tensiometers and software solutions as well as a new range of intrinsically safe load cells.
This high stability gives the Loadlink plus over 5,000 divisions and the highest standard resolution of any digital dynamometer on the market today.
Over the years the line has been expanded and the Loadlink plus is now used on a daily basis for load monitoring and heavy lifts ranging in capacity from 1t to 300t, by a variety of industrial and commercial industries including manufacturing, transportation, agriculture, oil and gas, utilities, aerospace and clean energy.