Examples of using National electrical code in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
What is The National Electrical Code?
Neon signs must also meet the requirements of the National Electrical Code.
NEC(National Electrical Code)- A set of rules governing safe wiring methods.
Conformance with the National Electrical Code.
The NEC(National Electrical Code) is a standard for the safe installation of electrical wiring and equipment in the United States.
Testing it is not only prudent, it is required by the National Electrical Code.
For information regarding specific national electrical codes, refer to the articles mentioned in the next section.
Make sure that the home is up to safety standards as required by the National Electrical Code.
The National Electrical Code(NEC) mandates acceptable clearances for power lines to keep the public safe from coming into contact with them.
Make sure that the home is up to date andsafety standards as required by the National Electrical Code.
A protective earth, known as an equipment grounding conductor in the US National Electrical Code, avoids this hazard by keeping the exposed conductive surfaces of a device at earth potential.
Flexible Metallic Tubing(FMT) is not the same as Flexible Metallic Conduit(FMC)which is described in National Electrical Code(NEC) Article 348.
The National Electrical Code(NEC) is published by the National Fire Protection Association(NFPA), and is part of the legal requirements for construction in most jurisdictions in the United States.
Our materials are constantly updated to conform to the National Electrical Code, which changes every three years.
While companies such as General Electric manufactured fittings for the system and a few buildings were wired with it,it was never adopted into the US National Electrical Code.
The Brainerd electrician certificate examination is open book andis centered on the 2008 National Electrical Code, and you will need to score no less than 75 percent to pass.
The National Electrical Code(NEC) is widely accepted throughout the US as the definitive standard for electrical work and a good portion of that code consists of procedures to prevent fire.
It is not the same as Flexible Metallic Conduit(FMC)which is described in National Electrical Code(NEC) Article 348.
According to the National Electrical Code(NEC), a cable tray is a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways.
Its use, form,and installation details are often specified by wiring regulations, such as the US National Electrical Code(NEC) and other building codes.
According to the US National Electrical Code, a switchboard is a large single panel, frame, or assembly of panels on which are mounted switches, overcurrent and other protective devices, buses, and usually instruments, on the face, back, or both.
Its use, form,and installation details are often specified by wiring regulations, such as the US National Electrical Code(NEC) and other building codes. .
If you live in an older house without a grounded panel,you're not required by the National Electrical Code to update your ungrounded outlets to grounded ones, but for safety's sake you may want to do this anyway.
On the first day, participants will be introduced to single line diagrams and electrical symbols used for distribution equipment,both International Electrotechnical Commission(IEC) and National Electrical Code(NEC) symbols will be covered.
Its use, form,and installation details are often specified by wiring regulations, such as the US National Electrical Code(NEC) or other national or local code. .
Its use, form,and installation details are often specified by wiring regulations, such as the US National Electrical Code(NEC) and other building codes.
Advanced meters must meet safety requirements andstandards detailed in the National Electrical Safety Code.
Regulations may be established by city, county, provincial/state or national legislation, sometimes by adopting in amended form a model code produced by a technical standards-setting organization,or by a national standard electrical code.