Examples of using Detection efficiency in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
High detection efficiency.
More than 99 percent storm detection efficiency.
Thunderstorm detection efficiency of close to 100%.
Manual calculation can be avoided to improve detection efficiency.(optional).
The high detection efficiency, to achieve full detection. .
Therefore, there was a problem that detection efficiency was low.
Current flash detection efficiency greater than 80% in most areas of the Northern hemisphere and between 10-80% in the Southern hemispheres.
Proteins such as serum andBSA added to medium also sometimes lower the NO detection efficiency.
Thunderstorm detection efficiency near 100%.
At the same time,high-performance multialkali PMT selection ensures the best possible detection efficiency and clearest observation.
Compared to the serial detector, the detection efficiency improves as much as the multiple of the number of channels.
The world's leading frits velocity control technology, the most optimal flow rate was obtained, solvent elution time was controlled in7-10min, and the detection efficiency was improved.
The detection efficiency of 45% is dominated by final-state π0 absorption or charge-exchange in the nucleus, and the expected background is 2 events/Mton-yr.
High-performance multialkali PMT selection ensures the best possible detection efficiency and clearest observation.
The GLD360TM Network Specifications Current flash detection efficiency greater than 80% in most areas of the Northern hemisphere and between 10-80% in the Southern hemispheres.
For both protozoa, fluorescent antibody reagent kits have already been developed,which have contributed to heighten the detection efficiency health insurance does not apply to such kits, though.
For example, in spectral regions where the detection efficiency is low, the incident radiation intensity can be increased accordingly to increase measured scattered radiation signals in these regions.
The combination of high-performance multialkali PMT selection andadvanced coatings on all the mirrors ensures the high detection efficiency and clear observation even with weak fluorescence emissions.
After the loss of half the field of view due to failure of Data Processing Unit No. 1 in March 2009, the observation strategy changed to 3 months observing runs,in order to optimize the number of observed stars and detection efficiency.
FARO 3D scanner helps to improve tunnel detection efficiency Within the South High-Speed Railway, FARO 3D laser scanner is mainly used for tunnel detection during tunnel construction and operation and maintenance.
High-performance Multialkali PMT Special high-performance multialkali PMT selection in thisnon-descanned detector unit ensures excellent detection efficiency with reliable and well-proven PMT technology.
Median location accuracy of 1.5 to 2.5 km Thunderstorm detection efficiency better than 99% Network uptimes above 99% Data feed uptimes of better than 99% Event timing precision of 1 microsecond RMS Peak amplitude measurements Polarity.
Moreover, since it is necessary to detect DNB satisfying the above conditions(B1) to(B3) from a large amount of measurement data,the calculation amount is enormous and the detection efficiency is not high.
In regard to the methods for patients' fecal tests for protozoa,those for cryptosporidiosis involved such methods that enhance the detection efficiency, including fluorescent antibody staining Table 1.
In addition, the research group invented a new approach for electron spin detection method, which was combined with hard X-ray photoemission spectroscopy,greatly improving the detection efficiency.
In this study, the gamma-ray detection efficiencies at a position 5cm above the detector window were determined for the gamma rays in the energy range from 0.61MeV to 2.2MeV using only KCl and uranium phosphate mineral samples.
The detection efficiencies on the detector window was also estimated for the strong gamma rays in the energy range from 0.14MeV to 2.6MeV that were emitted from these two kinds of samples and the air-dust one.
It has a function of automatic fault diagnosis, improving the efficiency of detection.